New York SOLD Forgeline GA1R - GT350 factory size except offset

[TDC]

EDITED 6/22 - SOLD the rims,

EDITED 6/21 - Sale pending on the rims. Tires are sold

EDITED 5/29 - Sale of Nitto tires pending. Forgeline rims remain for sale. Price for rims = $3300

EDITED 5/9 - So the way I wrote the original post to describe the offset is confusing so I list the offset directly below:

Finished in Satin Bronze, these GA1R factory GT350 size except the offset was changed to benefit handling for SCCA AutoX competition. They were used for approximately 20 track days and a full season of SCCA AutoX.

Wheel specs
Fronts: 19x10.5 +23
Rears: 19x11 +55

They are in excellent condition and are straight, no bends, no cracks. More pictures are available for serious inquires.

SOLD TIRES: Nitto NT01's have about 50% life left depending on how much front camber you will run. Last time I ran them I set my personal best so they still have plenty of grip.

Tire specs:
305/30/R19

Price $3300 - (located on Long Island NY)

View attachment 458709 View attachment 458710

 

[Tonymustang302]

Are you able to rotate with that backspacing for a square setup?

 

[TDC]

Rims are not swappable from front to back.

I usually would remove the tires from rims to swap them front and rear.

 

[Tonymustang302]

Damn id be all over these if they were a same back spacing.

 

[TDC]

Bump.

I’m willing to split the drive up to 150 miles, meet halfway (300 mile radius from NYC between the buyer and myself)

You’d be hard pressed to find a better deal on race quality rims in this great condition with tires ready to hit the track or road. The rims have Ford TPMS installed.

 

[Tonymustang302]

If these were square id already bought them

 

[TDC]

The money you’ll save compared with new Forgelines or what most people want for used Forgelines will pay for multiple lifetimes of dismount/remounts of tires

Plus not using spacers is a more robust mounting means.

 

[KonaBoss]

Sent you a PM

 

[TDC]

PM replied

 

[Shifterracer]

dam! shame so far away!

 

[TDC]

So I’ll be purchasing track rims for my new car and need to open up storage space so for anyone willing to split the drive I’m willing to deal

 

[Tonymustang302]

Really wish these were square.....i justed ordered apex ec-7’s square

 

[TDC]

I hear ya Tonymustang302 but I didn’t want to run spacers on track since I read about some of the risks and extra loading they place on the studs. Never had an issue with my setup using the factory studs, no damage and never needed to be replaced after several seasons and countless dismount and re-mount of the wheels onto the car.

 

[TDC]

PM sent

 

[TDC]

Post updated. Sale of tires pending. Rims available