Soft Glow Pony Emblem Surround

[OySmallFry@SCS]

Sorry but it looks like a cow...or a very fat horse...because some critical lines are missing (legs)

Hahaha you're totally right. It's a mockup. I'm already working on the 2nd prototype.

Sponsored

 

[RoninRed]

Keep us posted mate! You've got a line of people depending on you! lol

 

[ScottsGT]

Back in '65 you could buy a lighted Pony corral for your grill. It's not a new concept.

 

[ShaneS550]

I'm also interested in this idea. I'm not a professional but what about loosening up the front emblem enough to slide in two strips of LEDs so that it illuminates it (some LEDs similar to the ones on the attached pic). Then tighten the emblem back up and somehow add some wiring to make them work. Just a thought haha

 

[ScottsGT]

I'm also interested in this idea. I'm not a professional but what about loosening up the front emblem enough to slide in two strips of LEDs so that it illuminates it (some LEDs similar to the ones on the attached pic). Then tighten the emblem back up and somehow add some wiring to make them work. Just a thought haha

Emblem is held in place by plastic "teeth" that clip into the grill. And usually they break off when attempting to remove.
Best bet would be to just break off the tabs, put a spacer behind the Pony to stand it off from the grill and then light it from behind with the LED's. Hold it all together with 3m double sided foam tape.
Drill holes behind the pony to run the wires through.

 

[SLA]

Saw this on mustang forums for the 94-12's

http://mustangforums.com/forum/general-tech/648706-illuminated-pony-badge-94-2011-a.html#

 

[OySmallFry@SCS]

Saw this on mustang forums for the 94-12's

http://mustangforums.com/forum/general-tech/648706-illuminated-pony-badge-94-2011-a.html#

Yeah, i tried to get one of those but none of the eBay links work anymore.

 

[OySmallFry@SCS]

Emblem is held in place by plastic "teeth" that clip into the grill. And usually they break off when attempting to remove.
Best bet would be to just break off the tabs, put a spacer behind the Pony to stand it off from the grill and then light it from behind with the LED's. Hold it all together with 3m double sided foam tape.
Drill holes behind the pony to run the wires through.

Pretty much exactly what my 2nd prototype is. Great minds... Parts on the way.

For the grille delete / aftermarket grille guys, a 3D printed pony outline could work.

 

[Drugdealr]

Pretty much exactly what my 2nd prototype is. Great minds... Parts on the way.

For the grille delete / aftermarket grille guys, a 3D printed pony outline could work.

Im about to order GT grill set I was thinking I'm gonna try to Dremel out the honeycomb but leave the center pony attached to at least one single strip of honeycomb. Is that makes any sense at all.


Sent from my iPhone using Tapatalk

 

[OySmallFry@SCS]

Im about to order GT grill set I was thinking I'm gonna try to Dremel out the honeycomb but leave the center pony attached to at least one single strip of honeycomb. Is that makes any sense at all.


Sent from my iPhone using Tapatalk

Oh yeah, that could look really cool. Try it out and post some pics. I saw a SEMA car that had a grille delete but mounted the pony somehow.

Edit:
Found it. Bojix Designs

 

[Drugdealr]

Looks like it was mounted from the underneath the hood latch with like a curved piece of metal or something.


Sent from my iPhone using Tapatalk

 

[OySmallFry@SCS]

Got the backlit pony finished up last night. Will try to mount today.

 

[nrothaar]

Got the backlit pony finished up last night. Will try to mount today.

Can't wait to see it!

 

[RoninRed]

WOOO! I had lost hope, but I'm glad you're still going strong!!!

 

[OySmallFry@SCS]

Need to trim out the center section, but i think this is a worthy GlowPony prototype v2.

And then for fun, bc why not double light!

Sponsored