Houdinii_5.0
Active Member
- Thread starter
- #1
I have a midnight built 10 speed with a lund tune. Every time I go WOT the 4-5 shift happens at 6900-7000 rpm. Every other gear will see around 7800. I've pulled the dyno plug so there should be very little traction control input. Tuner says it doesn't really make a difference due to the gears being so short anyways. Just wondering what would cause this and why it short shifts if the commanded shift point is at 7800. Looking at the log as soon as I hit 4th it almost immediately commands 5th. Car runs hard and is really smooth otherwise.
Sponsored
