Shifter Buzz

[Shoshin]

The reverse ring/collar on my shifter buzzes a lot from transmission vibration mainly in the 1st 3 or 4 gears.

I know you can replace the knob, but that would not help this issue. Is it possible to put some kind of rubber sleeve or o-ring to quieten it?

Must not be a wide spread issue as I have not seen it mentioned.

Just curious

Sponsored

 

[BARTON INDUSTRIES]

You could install our shifter and all your problems will go away. Haha

More to your question though. It's actually VERY common for the stock reverse lockout to buzz. If you check out the video below, around the 10 minute mark I show why.

[ame]

The easiest way to help keep the stock shifters reverse lockout from buzzing is a rubber band. It needs to be tight enough that it holds the plastic piece securely to the shifter but loose enough that it will still slide up and down freely.

www.BartonIndustries.com

 

[Shoshin]

Thank you for the information

At least I can see what is happening

The Barton shifter looks like a really solid design

Sponsored