Rear end

[Greg Elzey]

I have a 2016 Gt Premium auto car. I bought a rear from a 16 Pp1 car that was a manual. Is there anything that I have to do or will it bolt up into my 16 without any problems.

Sponsored

 

[K4fxd]

What do you mean by rear? If you mean the rear subframe and all it's parts it will. If you mean the differential it will have the wrong yoke.

Auto and manual yokes, flanges, are different.

 

[Cobra Jet]

@JohnVallo has the absolute best rear gear thread on this site - it's very detailed with a lot of pics and tech from him - and good tech responses throughout the thread.
https://www.mustang6g.com/forums/threads/inside-the-super-8-8-rear-end.150514/

 

[Greg Elzey]

Yes I meant to say the rear subframe. Will be going from a 3.15 to a 3.73 . Will I need to have something done to the transmission since the gears will be different. Thanks I’m not use to the new cars I’m use to old muscle

 

[K4fxd]

Yes I meant to say the rear subframe.

This will bolt right up

Will be going from a 3.15 to a 3.73

Like I said the driveshaft to rear flange is different. In old school the u-joint wont fit. So you will have to change the flange from manual to auto. Unless your new diff is from an 18 up.

 

[Greg Elzey]

Ok thank you

Sponsored