Procharger Upr catch can setup

[whatsup62]

I am assuming those of you still running the stock intake tee'd into the driver side "dirty line" for the IMRC vent line....correct?

Sponsored

 

[RockStang]

I am assuming those of you still running the stock intake tee'd into the driver side "dirty line" for the IMRC vent line....correct?

Good question. Curious as well.

 

[whatsup62]

I called Steve today...the answer is yes.

 

[Dntalman]

http://www.makperformance.com/2015-...tch-Can-for-Procharger-Kits-by-UPR_p_469.html

They have some pics of the setup, not sure it will be that helpful but figured i would post it.

I guess with one bolt mounting, we should be able to mount it..:shrug:

 

[Chummel]

What happens to the line going to the imrc in the back?

 

[whatsup62]

What happens to the line going to the imrc in the back?

Tee's in the dirty line on drivers side.

 

[whatsup62]

Bringing back to show install....nice unit!!

 

[Chummel]

More pics, I still haven't installed mine.

 

[Pony15]

One pic

 

[Geotoxic]

Bringing back to show install....nice unit!!

One pic

Hey did you guys connect your catch using the provided bracE?

Like below?

 

[whatsup62]

No....mine is like Pony15's. In the pic you posted it appears that there is a 90 degree fitting on the catch can. Mine came with a straight fitting on catch can and a 90 degree on hose. Makes it stick up high in the engine bay and not sure id have clearance. Also the bolt hole in bracket is not large enough to mount it where your picture shows. There is a hole in a tab that comes off strut tower kinda in front and below where brace mounts that I used. Bolting this on took the longest of what I figured to be a pretty easy install.

Sponsored