ReapSow
Well-Known Member
- Thread starter
- #1
UPDATED PRICE $5400 shipped in the Continental USA, STEAL OF A DEAL 40% less than it cost me new 13 months ago.
Selling my Procharger D1x, stage II just under 1900 miles. Black head unit, intercooler and brackets. Helical gears, red race valve. Has 4" griptec upper installed, also comes with procharger 4". ID1050 injectors (injectors were used, you will need new o rings for them) Makes between 11-12 lbs with a 7" balancer on the 4" at 5000 ft. Elevation). Also comes with new gates HD green belt, a new gates standard belt, two bottles of procharger oil. The finish on the painted parts is not perfect, that said, the wear is on the connections with the exception of one spot on the head that has a scratch like mark (not through the finish). The air filter isn't pretty from being wedged in the front fender but you don't see it and it is inexpensive to replace. No balancer included, source your own, Innovator West part #817 (cost $475). Asking $5400 shipped in the continental US. Unopened still in the package Griptec 3.85" pulley ($170 new) and JMS Dual BAP ($600 new) not included but can also be made a part of package if interested.
View attachment 484929
View attachment 485891
Selling my Procharger D1x, stage II just under 1900 miles. Black head unit, intercooler and brackets. Helical gears, red race valve. Has 4" griptec upper installed, also comes with procharger 4". ID1050 injectors (injectors were used, you will need new o rings for them) Makes between 11-12 lbs with a 7" balancer on the 4" at 5000 ft. Elevation). Also comes with new gates HD green belt, a new gates standard belt, two bottles of procharger oil. The finish on the painted parts is not perfect, that said, the wear is on the connections with the exception of one spot on the head that has a scratch like mark (not through the finish). The air filter isn't pretty from being wedged in the front fender but you don't see it and it is inexpensive to replace. No balancer included, source your own, Innovator West part #817 (cost $475). Asking $5400 shipped in the continental US. Unopened still in the package Griptec 3.85" pulley ($170 new) and JMS Dual BAP ($600 new) not included but can also be made a part of package if interested.
Sponsored
Attachments
-
0 bytes Views: 0
-
0 bytes Views: 0
Last edited: