Post Pix of your S550 with aftermarket wheels and tires

[SidewaysMike]

Finally got my wheels on. 13-14 GT500 reps from AM. 19x10 squared with 5mm spacer on all corners. Wrapped in 275/40/19 Bridgestone S04 PP. Pictures don't do justice. You never truly appreciate how lame the car looks with the stock wheels inset so far until after you get a decent stance lol

Car looks great! Can I ask which quad tips are those?

Sponsored

 

[Hole]

19X9.5 Vp5's

Been sitting in the living room since last Tuesday. Finally had time Saturday to put them on.

Sorry for the picture being sideways! don't have time to mess with it.

 

[DRKHORS]

Been sitting in the living room since last Tuesday. Finally had time Saturday to put them on.

Sorry for the picture being sideways! don't have time to mess with it.

Looks good! Those wheels were on my short list before going with Stance wheels.

 

[Paul@PKAUTODESIGN]

Been sitting in the living room since last Tuesday. Finally had time Saturday to put them on.

Sorry for the picture being sideways! don't have time to mess with it.

They came out excellent brotha !

 

[Hole]

Thanks Paul. They turned out amazing! Definitely will be getting my next set from you as well! Highly recommended PK Auto Design!

 

[Jon|3.7]

always liked those especially the engraving

 

[bluehorse]

that looks badass man. love those wheels.

Thanks Man!!:cheers:

Car looks great! Can I ask which quad tips are those?

Thanks!! They are 2.5ID to 3.5OD quads off fleebay. "Massaged" the cut outs for the tips with a sanding bit on a dremel. The car only has a muffler delete. Cost me about $150 total for the muffler delete and tips. The muffler delete was originally done with the stock tips and the quads added later. I want to take the car back in though and have the tips readjusted as they are a little longer than the stock ones and stick out just a little farther than my liking. Will probably eventually do a Roush valance and 4in quads.

 

[GetYourWheels]

Customer of ours just sent in photos of his new Forgestar F14 setup in the Super Deep Concave setup all around! First S550 Mustang to pull off the SDC on all fours! 20x10.5 in the front and 20x12 in the rear! 285 in the front and 325 in the back!

 

[Eisman]

Looks great. Fitment is On Point!!!!

 

[Paul@PKAUTODESIGN]

Thanks Paul. They turned out amazing! Definitely will be getting my next set from you as well! Highly recommended PK Auto Design!

Thank you sir !

 

[livewire2003]

Finally got my wheels on. 13-14 GT500 reps from AM. 19x10 squared with 5mm spacer on all corners. Wrapped in 275/40/19 Bridgestone S04 PP. Pictures don't do justice. You never truly appreciate how lame the car looks with the stock wheels inset so far until after you get a decent stance lol

I will throw my money to whatever company makes something similar to these but with a nice deep concave. That would look absolutely amazing

 

[GetYourWheels]

I will throw my money to whatever company makes something similar to these but with a nice deep concave. That would look absolutely amazing

Rotiform BLQ?

 

[livewire2003]

Rotiform BLQ?

Unfortunately it's got too many spokes compared to the GT500 wheel. :frusty:

 

[ronnieb1958]

Post Pix of your S550

perhaps this: RTR Tech Mesh

 

[Paul@PKAUTODESIGN]

What about this.

RSR R801

Sponsored