Sponsored

Plastidip clear bra?

Raoh

Well-Known Member
Joined
May 21, 2015
Threads
23
Messages
386
Reaction score
34
Location
United States
Vehicle(s)
2003 Audi a4, 2015 Mustang GT
I am very worried about how I will keep the paint all nice and perfect when I get the car, and I am very new to actually owning something nice. I have seen some quotes on getting a real clear bra installed, and it's always over two grand. Would I be able to just put a few coat of a glossy clear coat plastidip on top of my paint, and keep the factory look of the color I pick?
Sponsored

 

WatchSquid

Well-Known Member
Joined
Dec 9, 2014
Threads
24
Messages
631
Reaction score
178
Location
D/FW Texas
First Name
Jim
Vehicle(s)
93 Reef Blue Mustang convertible
I have heard that same thing, but never any results.
 
OP
OP

Raoh

Well-Known Member
Joined
May 21, 2015
Threads
23
Messages
386
Reaction score
34
Location
United States
Vehicle(s)
2003 Audi a4, 2015 Mustang GT
I have heard that same thing, but never any results.
I know it won't have any affect on the paint, and it should protect the paint, but I am wondering if it will change the actual look of the paint much. I like the colors of the mustang. So unless I get that horrible yellow, or maybe white, I'd just wanna cover it with something clear for protection but keep stock looks.
 

SVTFreak

#275
Joined
Jan 6, 2014
Threads
60
Messages
3,478
Reaction score
733
Location
Prairieville, LA
Vehicle(s)
2015 Wimbledon white LE #275 A6
Plastidip will chip and peel easily if surface is not prepped correctly. Won't last and will look terrible. Plastidip is a cheap, easy to apply, bandaid (basically) shortcut for not doing things the right way.

There's a reason clear wrap bras are expensive. They are worth it for the good materials. They are UV resistance, tough and pliable.

If you want to save money, go to any vinyl supply place and buy it yourself. Then wrap it yourself. Use a heat gun to warm it and stretch it around the corners and body lines. After its all in place, heat the material to approx 200 deg (check manufacturers recommendation) to "set" the glue and make it stick tight.

That would be the cheapest route that isn't shooting the equivalent of spray can paint on your car.

Aside: I don't get people penchant for shooting that cheap crap on their 40 thousand dollar car. It's junk.
 

jbailer

Well-Known Member
Joined
May 1, 2015
Threads
43
Messages
3,270
Reaction score
1,297
Location
Maryland
First Name
Joe
Vehicle(s)
2015 EB Magnetic Premium PP 50AP
I haven't (and wouldn't) tried it but really think you'd be disappointed with the appearance. I had a very reputable shop install the XPEL film to protect the front of mine. Yes, it was expensive but I just weighed it against having the front repainted or driving around with rock chips like my last Mustang.
 

Sponsored

EcoSwag1990

Well-Known Member
Joined
Oct 12, 2014
Threads
60
Messages
3,278
Reaction score
910
Location
West Chester, PA
Vehicle(s)
2016 Triple Yellow GT
As ugly as a lot of these clear bra jobs look especially after a couple years I'd just rather have it repainted in a few years if it's that bad. It might even cost less
 

SVTFreak

#275
Joined
Jan 6, 2014
Threads
60
Messages
3,478
Reaction score
733
Location
Prairieville, LA
Vehicle(s)
2015 Wimbledon white LE #275 A6
As ugly as a lot of these clear bra jobs look especially after a couple years I'd just rather have it repainted in a few years if it's that bad. It might even cost less

You have to get good quality stuff. Autozone and fly by night cheap stuff will look terrible in short order. Real, high quality clear wrap material made for outdoor use will last much longer and look much better.

I helped start a wrap business with my best friend. Got him off the ground. Learned more than I wanna know.

The big money guys wrap the whole cars in clear. My buddies done several exotics and a local dudes several fr500's.
Sponsored

 
 








Top