On3 TT set up. Cmcv line???

[S550carguy]

Trying to finish up an on3 twin setup but I can't figure out what to do with the cmcv line that originally connects to the factory intake tube. The one that comes up the drivers side of the intake manifold.

Any advice?

Sponsored

 

[Dennisn]

I have hellion setup and I'd think it would be the same. Mine is vented to atmosphere per my tuner. In other words just left not capped off and not connected to anything. I'm assuming your talking about the imrc thingy.

 

[rredd14]

Trying to finish up an on3 twin setup but I can't figure out what to do with the cmcv line that originally connects to the factory intake tube. The one that comes up the drivers side of the intake manifold.

Any advice?

It needs to be attached to 1 of the air filters per my tuner.
In my case I attached it to the Turbo-Shield on the driverside turbo.

 

[amhauke]

Delete all the cmcv setup. You don't need that on a forced induction car. Here is what I did when I was doing my Hellion install.

 

[z06psi]

I just bought a 11-14 intake to get rid of it. 50.00 or less. Hell I have two I do not want anymore.

Sponsored