New GT350 Owner farewell Ecoboost...

[Tank]

this is concerning. anyway have a safe flight and just keep an eye on the oil.

He’s fine as long as they used:
https://www.amsoil.com/newsstand/auto-and-light-truck/articles/premium-protection-ford-mustang/

Sponsored

 

[lightrules]

He’s fine as long as they used:
https://www.amsoil.com/newsstand/auto-and-light-truck/articles/premium-protection-ford-mustang/

it's not the amsoil I'm concerned about.

 

[Tank]

it's not the amsoil I'm concerned about.

Ahhh, gotcha...

@BTBAM , did the dealer use the proper
FL-2069-ST filter?

Did they torque it to spec?

 

[BTBAM]

Ahhh, gotcha...

@BTBAM , did the dealer use the proper
FL-2069-ST filter?

Did they torque it to spec?

I.....don't know. Looks like I'll have to go under it to find out. Crap.

 

[TDC]

Also recommend putting a worm gear clamp around the oil filter and have the screw rest against the engine then tighten down so it is snug but not so much that you dent the oil filter. I do this on mine in addition to proper torque as extra protection especially being on track. Has never loosened between oil changes. Basically the screw will keep the filter from backing off.

 

[rum_punch_ruby]

Fantastic buy! And with the classic Shelby colors no less!

 

[Ninjak]

Congrats ! Enjoy it. ....your going to have a blast !

 

[Tank]

I.....don't know. Looks like I'll have to go under it to find out. Crap.

Also recommend putting a worm gear clamp around the oil filter and have the screw rest against the engine then tighten down so it is snug but not so much that you dent the oil filter. I do this on mine in addition to proper torque as extra protection especially being on track. Has never loosened between oil changes. Basically the screw will keep the filter from backing off.

@BTBAM , pics and info on this are in the “GT350 Basics..” sticky in my sig.

The filter and torque specs look like:

Sponsored