atomicfusion
Member
- Joined
- Feb 7, 2015
- Threads
- 1
- Messages
- 8
- Reaction score
- 0
- Location
- Columbus Oh
- Vehicle(s)
- 15 ecoboost, 14 vett, 11 ss,07 Z06
- Thread starter
- #1
Well, I have built a bunch of cars, and now I have purchased my first mustang...I bought a 2015 Base Ecoboost with the PP and put 143 miles on it before I strapped it down on the dyno.
1st two pulls were 258 and 259hp, but the 3rd pull was 277hp!
After that, we plugged into it and messed around a bit, but I only found Tq, not really much in the way of HP, so we tore it apart
26 minutes later we had the bumper, front wheel, intake, intercooler, and intercooler piping off along with the stock exhaust and started fabbing!
I'll have to post some pictures as we progress, but here is what I have planned...
600hp core intercooler
hard pipe kits with Tial QRJ BOV
Hard pipe intake
Offroad downpipe with resonator delete 3" to a Y and 2.5" duals after that.
After these are done, I plan on tuning these to the best they will go, and then doing a turbo upgrade.
My first though it a GT35 or something around that size, I guess we will just have to see how things go there.
1st two pulls were 258 and 259hp, but the 3rd pull was 277hp!
After that, we plugged into it and messed around a bit, but I only found Tq, not really much in the way of HP, so we tore it apart
26 minutes later we had the bumper, front wheel, intake, intercooler, and intercooler piping off along with the stock exhaust and started fabbing!
I'll have to post some pictures as we progress, but here is what I have planned...
600hp core intercooler
hard pipe kits with Tial QRJ BOV
Hard pipe intake
Offroad downpipe with resonator delete 3" to a Y and 2.5" duals after that.
After these are done, I plan on tuning these to the best they will go, and then doing a turbo upgrade.
My first though it a GT35 or something around that size, I guess we will just have to see how things go there.
Sponsored
