My CO

[Stark]

Yea, it started to come off, never stuck it back on yet

I am actually liking it being blank mate

Need to meet up soon so I can hear the exhaust.

Sponsored

 

[SteveS]

Yea, it started to come off, never stuck it back on yet

Hmm, I stuck a black US-style GT to my blank panel and before I'd even got it fitted to the car the emblem started to lift at the corners. Problem being the panel is slightly curved and the emblem isn't. The emblem is also hollow so the adhesive doesn't have the biggest surface area to stick to. Not sure what to do about it tbh.

 

[Ian whu]

Hmm, I stuck a black US-style GT to my blank panel and before I'd even got it fitted to the car the emblem started to lift at the corners. Problem being the panel is slightly curved and the emblem isn't. The emblem is also hollow so the adhesive doesn't have the biggest surface area to stick to. Not sure what to do about it tbh.

Same thing happened to mine, I've put more 3m tape on, but as u said, not a lot of surface are to stick to, Might try fill it up with araldite

 

[Stark]

Same thing happened to mine, I've put more 3m tape on, but as u said, not a lot of surface are to stick to, Might try fill it up with araldite

Yeah fill up the hollow part to increase the surface area you can use to stick it down with.

 

[Manders Mustang]

Same thing happened to mine, I've put more 3m tape on, but as u said, not a lot of surface are to stick to, Might try fill it up with araldite

Or any kind of modelling clay/putty will work, just to get a flat surface on the back

 

[Ian whu]

I am actually liking it being blank mate

Need to meet up soon so I can hear the exhaust.

Sure do mate

 

[SteveS]

Or any kind of modelling clay/putty will work, just to get a flat surface on the back

Though preferably slightly curved rather than flat
The stiffer it gets, the harder it'll be to stick it down.

 

[Manders Mustang]

Though preferably slightly curved rather than flat
The stiffer it gets, the harder it'll be to stick it down.

Can use water on putty to keep it manipulable for a little extra time.

 

[slowhand99]

I used the degreaser out of the Dr ColorChip kit to clean off the decklid before sticking mine......... So far so good.

 

[Ian whu]

WELL, my rear lights started playing up again, thats 4 times now. so taking them off for the last time, am selling them to the guy in Poland, has been a complete joke,

my fronts was supposed to be done by saturday, still not done, am done with lights NO MORE

 

[John577]

WELL, my rear lights started playing up again, thats 4 times now. so taking them off for the last time, am selling them to the guy in Poland, has been a complete joke,

my fronts was supposed to be done by saturday, still not done, am done with lights NO MORE

Damn Ian, that's really bad news ... :(

Really crazy that you have a lot of problems with your rear lights while others are still working fine...

 

[Ian whu]

he even done my version 4, so no relay, they turned up, indicators on one side wasn't working, so sent me a new module for me to solder on myself, been on car a week, now playing up,

 

[Manders Mustang]

he even done my version 4, so no relay, they turned up, indicators on one side wasn't working, so sent me a new module for me to solder on myself, been on car a week, now playing up,

Sounds like a hunk of sh1t. Time to go back stock :frusty:?

 

[Ian whu]

yep, will tint them, and back to stock

 

[Manders Mustang]

yep, will tint them, and back to stock

Ah damn; must be a b*tch that this has happened... But at least you still have Lights I guess...

Wtf have gone wrong with the fronts? They're relatively easy to do?!

Sponsored