MRR Design Wheels Custom Color options.

[Need4SpeedMotors]

Nice -- but how is the FS01 different from the GF9? Both look like the same 7 spoke mesh look. Is one Flow Formed, and the other not?

Also, you should put all these pics on one page on the site so we can see all the finishes next to each other (preferably, all outdoors and/or on vehicles).
BTW, I am a very experienced web guy who can help if you need it. Will work for wheels. hehe ;-)


Finally, are the M350s going to be made in 20" size?

Alright so where do we start, both designs are very close to each other, the main difference is the size availability and the weight. They are both cut on order

The GF9 wheel is a low pressure cast wheel fitment is set to a 19x8.5 and or a 19x9.5, the concavity is deep on the 9.5 ( as deep as most 10.5 wheels). Standard finishes are Machined silver or Satin Black (Matte)

The FS01 is a Flow Forge ( rotory forged) wheel so this means it is lighter then the GF9 wheel due to the way it is built, you have a much wider range of fitment including for instance 19x10 & 19x11 combinations. They are cut on order like the GF9 for the PCD and bolt pattern and the other thing is they are completely raw wheels. So these are powdercoated on order.

Hope that helps.


Also yes the M350 wheel will be coming out later in the year.

Sponsored

 

[OxFord6G]

Just wanted to give everyone a good look at these 24K Brush Gold GF9.
Completely Custom Specs and Finish talk about personalized.
I cant wait to see this project complete.

what you guys think.

Those look sharp! I'd love to see those on an Oxford White GT. I think I'd like something like that when I get my car but I'd want to see them on a white car first to get a better picture of what it would look like.

 

[MRRDesignWheels]

Here is a quick shot of a true Completed Hand Brush wheel.
we have 2 sets getting all prep up for Porsche 911,
stay posted pics coming soon.

 

[Rog13GTCS]

Here is a quick shot of a true Completed Hand Brush wheel.
we have 2 sets getting all prep up for Porsche 911,
stay posted pics coming soon.

Those are sexy. Cant wait to see those on a car.

 

[MRRDesignWheels]

Those are sexy. Cant wait to see those on a car.

Oh yeah me too, we have these Porsche line up for install next week, lets see what these baby's are going to look like.

 

[MRRDesignWheels]

FS06 Brush smoke

MRR Wheels FS06 shown in Brush Smoke.

available in 19x8.5, 19x9.5, 19x10, 19x11, 20x8.5, 20x9.5, 20x10, 20x10.5, 20x11 and 20x12

 

[Flyhalf]

offset for the 19?

 

[MRRDesignWheels]

offset for the 19?

well if your asking about the FS06 the off sets are fully custom.
all the Flow forged wheels on our FS line up are Raw aluminum, we CNC the center bores, PCD and your choice or our recommended off sets in our los Angeles Facility. Ones all the CNC work is completed we move over to our Finishing department also in house where we add any custom color you desire,.

update: off sets on any 19" ranges from 0et and can be adjusted depending on the wheel width up to 65et

 

[Flyhalf]

does it clear the brembo 6piston?

 

[MRRDesignWheels]

247 MPH Ford mustang on FS01 wheels by boost woks/MRR Wheels

so the next time someone ask me how good are your wheels ill just show them this video

2015 ford mustang going 247mph wit flow forged FS01

[ame]

 

[FreddyG]

so the next time someone ask me how good are your wheels ill just show them this video

2015 ford mustang going 247mph wit flow forged FS01

Congratulations!

That Mustang was ROLLING!

By the way....Nice wheels!

Sponsored