Mods!

[SamH_]

I saw that in the Europe section, someone opened it and found out that we have WY21W instead of PY21W (the French manual also says that we have PY21W, and it's wrong).

So I'll assume that the RHD model also have this kind of bulbs.

PS : Also take car for the reverse bulb, is not the same as the US model

ah if thats the case then we have the answer, cheers
and yeah i believe the reverse/foglight bulbs to be 3 individual W16W
have you changed these bulbs? i wondered what LEDs you recommend?

Sponsored

 

[John577]

ah if thats the case then we have the answer, cheers
and yeah i believe the reverse/foglight bulbs to be 3 individual W16W
have you changed these bulbs? i wondered what LEDs you recommend?

Here you go for the reverse Bulb :

http://www.mustang6g.com/forums/showpost.php?p=916000&postcount=338

 

[Monty]

amber corner blackout updated pics

Couple of pics showing the amber corner blackout. In the metal, I don't think they look like dodgy stuck on 'after market' jobs - although deep down I feel some shame!

 

[Greg C]

Looking good. Definitely one of the mods I will look to do when I get my Mustang in June.

 

[Centurion07]

I take it those are the actual BLACKOUT pieces rather than the tinted ones?

 

[Ericc B]

For those interested in painting/wrapping the diffusor insert in the rear bumper... Yesterday I found out this is not a separate part that can be taken out, it is actually connected to the rest of the bumper and the black surround is a take out part.

 

[Ericc B]

Btw, for those of you interested in tinting your rear lights, there is now a better quality alternative available from the Netherlands using glossy red vinyl instead of matt:

http://www.mustang6g.com/forums/showpost.php?p=940807&postcount=102

http://www.mustang6g.com/forums/showpost.php?p=941343&postcount=103

 

[John577]

For those of you interested to swap the EU Fog light to the US model, I've done it :

http://www.mustang6g.com/forums/showthread.php?t=39526

 

[Monty]

I take it those are the actual BLACKOUT pieces rather than the tinted ones?

Yes, didn't think there was much point in just tinting the amber.

 

[Centurion07]

Not to rip on your blackout pieces but for me, compared to the tints, these look a little bit "plasticky" and aftermarket whereas the tints darken the area enough to cover the amber but don't look "solid".

I hope I read their website & threads properly as I believe the ones I've got are a VERY dark tint i.e. almost blackout but without looking like a solid piece of plastic.

I'll see for definite once I've put them on.

 

[Manders Mustang]

Not to rip on your blackout pieces but for me, compared to the tints, these look a little bit "plasticky" and aftermarket whereas the tints darken the area enough to cover the amber but don't look "solid".

I hope I read their website & threads properly as I believe the ones I've got are a VERY dark tint i.e. almost blackout but without looking like a solid piece of plastic.

I'll see for definite once I've put them on.

What percent tints are they? like 70-95%?

 

[Centurion07]

Btw, for those of you interested in tinting your rear lights, there is now a better quality alternative available from the Netherlands using glossy red vinyl instead of matt:

http://www.mustang6g.com/forums/showpost.php?p=940807&postcount=102

http://www.mustang6g.com/forums/showpost.php?p=941343&postcount=103

Is it just me or do they look a teeny bit "orangey" compared to Papinist's matt ones from Anchor Room?

 

[Centurion07]

What percent tints are they? like 70-95%?

Erm...lemme go find the page with the comparison.

Here we go: http://www.anchor-room.com/product_info.php?cPath=132_130&products_id=18174

Those^ are the tints (which I've ordered) and obviously the blackout pieces are in Monty's pics above.

 

[Manders Mustang]

Erm...lemme go find the page with the comparison.

Here we go: http://www.anchor-room.com/product_info.php?cPath=132_130&products_id=18174

Those^ are the tints (which I've ordered) and obviously the blackout pieces are in Monty's pics above.

Yeha as you can still see the design behind them i'll shoow 90% + tints. Looks classy though.

 

[Big_G]

I know, not strictly a mod but has anyone got Mustang floor mats yet? I'm pretty sure the LHD ones won't fit? Shame because i quite like these http://www.cjponyparts.com/lloyd-ma...lack-with-tri-bar-logo-set-2015-2016/p/FM278/

The standard ones that came with the car are quite thin & flimsy + there isn't any in the rear.

Sponsored