Looking for PP front splitter

[Ecoboosted]

Like the title says. Looking to buy a PP front splitter.

************After posting this I realized there is a section for wanting to buy items. My apologies that this in the wrong section. I can't delete it.

Sponsored

 

[free]

I've been looking for an OEM one for a while, tough to find and even if you do without the PP belly pan you will have to retro fit it. This is a decent option at only $90 http://www.ebay.com/itm/15-17-Musta...ash=item56857c18af:g:lVUAAOSwARZXo72R&vxp=mtr

 

[Nick]

I got one on ebay for $135 shipped. Retro fitted it to a non pp belly pan this weekend. Took about two hours.

 

[Southview]

Nick. What did you have to do to fit the PP spoiler to your bumper?

 

[Nick]

Nick. What did you have to do to fit the PP spoiler to your bumper?

I had to trim about an inch off the front of the belly pan with my dremel, trim back the black plastic "lower inner clips" of the splitter with metal shears, and buy 6,2 inch M8 sheet metal screws from home depot.

It's not that hard to do but you have to be creative and not be afraid to cut up the belly pan and splitter. Just hold the belly pan up to the splitter and see what needs trimmed.

From an aero perspective not ideal but what I did will be covered up by the aftermarket splitter I'm putting on.

 

[Chef jpd]

Don't most aftermarket splitters delete the belly pan any way?

 

[Jon|3.7]

you dont need a belly pan if you get a splitter like apr, steeda etc

 

[Scurd Racing]

you dont need a belly pan if you get a splitter like apr, steeda etc

I think they still bolt to the belly pan for structural purposes, no?

 

[Nick]

I think they still bolt to the belly pan for structural purposes, no?

They bolt to the frame in at least a couple places. Personally my belly pan is going away once I get the Steeda splitter on.

Sponsored