Launch rpm mt-82 stickys

[Friesian]

I have a 2015 gt PP with 3.73s. Lund tune and pmas. Dss axles and driveshaft. I tried the 28x11.5 bias ply tires. Car falls on its face when it hooks. Seems like it doesnt have enough power to turn the bigger tires. Should I just keep launching higher untill something breaks..lol

Sponsored

 

[F1scamp]

Yes. Or get more power.

 

[Friesian]

Yes. Or get more power.

Its in the works..headers on there way. Still saving for boost

 

[Jay-rod427]

What rpm you launching at? dumping the clutch, or slowly letting it up?

 

[Friesian]

What rpm you launching at? dumping the clutch, or slowly letting it up?

I only went to 3500 and side steped the clutch.. dead hooked on the street.. but bogged like an old quadrajet 305

 

[Jay-rod427]

Definately higher rpm, with driveshaft, and axles already your not likely to break anything. Gotta launch slicks hard and get them to spin which is what they need to do. Some wheelspin, and clutch slip will yield much better results.

 

[Braski]

I launch @ 5000-5500 rpm with 14 psi in my Hoosiers and it takes off like a raped ape! I don't side step the clutch I just let it out as fast as I can. Have fun!

 

[Braski]

Get ready 2nd gear comes quick!

 

[Jay-rod427]

5,500 dump the clutch and spray 150 shot instantly. 28X13.50 bias et streets! Had it wired so 2-step button locked out the nitrous window switch so as soon as let go of the 2-step nitrous activated. Stock clutch even. Figure that stock 4.6 on a 150 shot made similar power to coyote.

Sponsored