PP2GT
New Member
- Joined
- Apr 13, 2025
- Threads
- 1
- Messages
- 1
- Reaction score
- 0
- Location
- Ontario Canada
- First Name
- Matt
- Vehicle(s)
- 2020 Mustang GT PP2 Manual
- Thread starter
- #1
Hi All,
I ordered and received the Hellhorse digital dash kit (plug and play) with new SCCM, buttons etc. Love the dash, however after the install I have two small issues.
1. The high beam headlights don't work. I know the turn signal stalk is good, when I pull or push it forward when the car is off the lights come on. I also swapped it with my old one and same issue.
2. I have no reverse light. I swapped the bulb with a new one and still nothing. The reverse camera works fine, just no light.
I've emailed Hellhorse, took them three weeks to respond asking if I used the new SCCM, I replied and its been another two weeks with no response, and they dont seem to answer their phone.
I cant seem to find any info on fuses for the high beams or reverse light.
Any help is greatly appreciated.
2020 Mustang GT PP2
Thanks,
I ordered and received the Hellhorse digital dash kit (plug and play) with new SCCM, buttons etc. Love the dash, however after the install I have two small issues.
1. The high beam headlights don't work. I know the turn signal stalk is good, when I pull or push it forward when the car is off the lights come on. I also swapped it with my old one and same issue.
2. I have no reverse light. I swapped the bulb with a new one and still nothing. The reverse camera works fine, just no light.
I've emailed Hellhorse, took them three weeks to respond asking if I used the new SCCM, I replied and its been another two weeks with no response, and they dont seem to answer their phone.
I cant seem to find any info on fuses for the high beams or reverse light.
Any help is greatly appreciated.
2020 Mustang GT PP2
Thanks,
Sponsored
