Installing Steeda Stop the Hop Starter Kit

LSchicago

Well-Known Member

Jun 11, 2020

I had a shop do mine. Installed Drag Springs, H pipe, Jacking rails, and GT350 axles at the same time.

Sponsored

2018 Mustang GT/A10. Mid level 301A, Kona Blue, Blk Acc Pack, Active Exhaust, 3.55LS. 11.92/118.39 when bone stock on factory 255's. Best to date: 10.20/138 with a Procharger P1X/4.00" pulley (let off early, ground issue)
*Mods: Procharger Stage 2 P1X, ~~4.5"~~ ~~4.25",~~ ~~4",~~ 3.5" Griptec 17+PSI on E85, LUND 93/E85 Tunes, MAK 4.5" Hurricane inlet. Jackal JR Fuel system with twin walbro 525's, PTFE lines & rails, FIC 1000's, NGK 6510 (.024), Reische 170*.
Steeda STH starter kit & drag springs, GT350 Axles & Steeda Rear Diff support with black bushing inserts.
CM components rear seat delete, Steeda Lightweight front bumper bar, DSS aluminum DS.
SVE SP2 19X10 with 285/35 Nitto Invo's & 17X10.5 Drag Star's with 315/50/17 ET Street R's.
Cervini's C series grilles, Big Worm Graphics, Motorsport hood vents.

Installing Steeda Stop the Hop Starter Kit

LSchicago

Well-Known Member

Similar threads