Hub specs

[KilluminatiDre]

I ordered some rims directly from Work wheels and they are telling me that they need the front and rear axle hub specs for the '15 Mustang GT. They need the outer diameter of the hub in MM and the height/depth of the hub in MM. Anyone have this info?

Sponsored

 

[Schu]

Wiki...

 

[KilluminatiDre]

I checked the mustang6g wiki and it's not on there.

 

[Evo_Rob]

70.4mm for diameter, not sure about the other specs

 

[KilluminatiDre]

70.4mm

Is that the diameter?

Sorry just saw the update

 

[Evo_Rob]

Yep, i edited my post to be clear haha

 

[Schu]

Yes... hub bore is 70.5

Depth is something else... not sure if anyone has ever measured that because most rims come with removable center caps. A few rims do not however

 

[KilluminatiDre]

so is it 70.4 or 70.5? lol

 

[Evo_Rob]

[MENTION=11685]Need4SpeedMotors[/MENTION] or [MENTION=14702]CarlosMRRDesignWheels[/MENTION] might be able to help you out here.

 

[KilluminatiDre]

Thanks

 

[Evo_Rob]

so is it 70.4 or 70.5? lol

The hub diameter is 70.4, but you use a 70.5 for spacers and wheels. You'd have to press things down if you used 70.4 exactly ;) You DID ask for the diameter of the hub

 

[KilluminatiDre]

The hub diameter is 70.4, but you use a 70.5 for spacers and wheels. You'd have to press things down if you used 70.4 exactly ;) You DID ask for the diameter of the hub

Ah I see, makes sense.

 

[Need4SpeedMotors]

It is a 70.5 when we do wheels we use that, however some ppl do 7.6 to be safer as well.

As for hub height i dont know that off the top of my head.

 

[KilluminatiDre]

It is a 70.5 when we do wheels we use that, however some ppl do 7.6 to be safer as well.

As for hub height i dont know that off the top of my head.

Thank you very much, is there a way for me to find out the depth?

 

[Evo_Rob]

Probably jack up the car and take off a wheel then measure?

Sponsored