How to set different Nguage guages

[Varekai]

Okay, so slap me for not being able to find any posts on this, I tried searching a half dozen different wordings on here, and google when I type Nguage just gives me N guage train crap, but how do you select different guages to show? For example, I managed to get the 6 guages to show up, but can't for the life of me get ethanol or Lambda 2. I also watched a couple vids on how to do the RPM light settings, but on the two different vids they both show the same thing, they select signal and hit the right arrow and it goes straight to RPM. Mine goes to a different setting, and no matter what I scroll throw I can't seem to find RPM, and got to the point that I had it so messed up I had to delete the settings and rescan. I am on the 1.80 FW as well.

Sponsored

 

[CeleronXXX]

When your looking at the screen with a the six different pids, press your finger on the pid you want to change. It will bring you to a screen that says signal, exit back or whatever, click signal, and then choose the signal you want. I just spent this morning setting mine up. I have the lights set for knock. Green lights for negative knock it goes red if I get positive knock.

 

[Varekai]

When your looking at the screen with a the six different pids, press your finger on the pid you want to change. It will bring you to a screen that says signal, exit back or whatever, click signal, and then choose the signal you want. I just spent this morning setting mine up. I have the lights set for knock. Green lights for negative knock it goes red if I get positive knock.

Thanks. I just like the RPM lights. Watching over a few days I've never hit knock so not too worried about the lights for that. If I was knocking I'd be watching it more. Mine goes down to -10 constantly under WOT

 

[CeleronXXX]

No prob man. It's not that I'm worried but I thought it would be the most important thing to use the lights for. Mine always adds timing too so they're always going green

Sponsored