PP2 wheels on GT350

[Mrzero]

Any GT350 owners install OEM PP2 wheels on their rides? If no one has ever installed them, does anyone know if they would even fit?

TIA

Sponsored

 

[jmn444]

no clue about the oem pp2 wheels, but the sp2 knockoffs will fit in 19x11 square if you run a 25mm spacer up front w/ extended studs or R studs.

 

[EFI]

does anyone know if they would even fit?

TIA

There's no reason why they wouldn't fit. If anything, it would "fit" a bit better on the GT350 with the winder fenders since they stick out a bit on the GT.

 

[Mikepol2]

FWIW I ran both GT350 and PP2 wheels on my PP1 with no clearance issues.

 

[jmn444]

There's no reason why they wouldn't fit. If anything, it would "fit" a bit better on the GT350 with the winder fenders since they stick out a bit on the GT.

depends on if the brakes will interfere with the wheel. based on specs it should, but without bolting it on it's just a guess.

 

[DrumReaper]

I have two hubcentric 25mm spacers just taking up garage space if anyone wants them... just oh shipping.

 

[JAJ]

There's no reason why they wouldn't fit. If anything, it would "fit" a bit better on the GT350 with the winder fenders since they stick out a bit on the GT.

The GT350 brakes are a lot bigger than the GT PP2 brakes, so, yes, there's a reason they wouldn't fit.

 

[Mikepol2]

The GT350 brakes are a lot bigger than the GT PP2 brakes, so, yes, there's a reason they wouldn't fit.

The inner diameters of the two wheels are the same so only reason they might not clear the brakes are the different offsets... +24 for the PP2 and +30 for the GT350.

 

[jmn444]

The inner diameters of the two wheels are the same so only reason they might not clear the brakes are the different offsets... +24 for the PP2 and +30 for the GT350.

I can't speak to pp2 vs gt350 oem wheels, but just because they are both 19's doesn't mean there is the same inner diameter where it could hit the caliper. I'd agree that most 19's SHOULD work though. 6gr are tight as hell, and sp2 replicas have comparably tons of clearance barrel to caliper.

 

[jmn444]

It seems odd nobody has done this though haha, i love pp2 wheels!

 

[jmn444]

 

[jmn444]

 

[Mikepol2]

The GT350 wheels are gone but I may consider selling the PP2 wheels in early June when my Mach 1 arrives... they have GT350-sized tires on them, 285/35-19 front and 305/35-19 rears. Had the stock GT350 295/35-19 fronts at first but dropped down to 285's for a little less tramlining.

 

[Wildcardfox]

I have both a PP2 and a GT350R. The PP2 spokes stick out and more concave that a regular GT wheel. On first blush, I would assume that there is enough clearance for the brakes because of the spoke design, but you will most likely need a spacer to adjust the offset. Sorry, not going to actually swap wheels, but giving my observation.

 

[Mrzero]

Thanks for all the responses guys. I think JMN444 answered my questions. JMN444, did you use any spacers?

Sponsored