help me reprogram a spare remote for 2015 Mustang

[pockama]

2015 Ford Mustang GT stick shift.
I have only one OEM 4 buttons remote, part# 164-R8120
Just purchased used OEM one.
I need to reprogram it.
Can you help me?
Tnx

Sponsored

 

[jmr061]

You need to go to the dealer.

 

[Slyfox]

this should work :1. Remove the rubber covering (A) from
the cupholder. Place the first
programmed key in the backup slot (B)
at the bottom of the cupholder, then
press the push button ignition switch.
2. Wait five seconds and then press the
push button ignition switch again.
3. Remove the intelligent access key.
4. Within 10 seconds, place a second
programmed intelligent access key in
the backup slot. Press the push button
ignition switch.
5. Wait five seconds and then press the
push button ignition switch again.
6. Remove the intelligent access key.
7. Place the unprogrammed intelligent
access key in the backup slot and press
the push button ignition switch.
Programming is now complete. Verify the
remote control functions operate and your
vehicle starts with the new intelligent
access key.
If programming was not successful, wait
10 seconds and repeat Steps 1 through 7.
If you are still unsuccessful, take your
vehicle to your authorized dealer.

 

[pockama]

i will try but I have only one original remote
I will let you know

Sponsored