TRACK-STANG
Well-Known Member
- Thread starter
- #1
Hay guys I came up whit a way to use the factory pedals pretty cheap and with good results so Far I know there is a steeda heel and toe kit and the accelerator pedal extension is only $25 but I wanted to try something different instead of putting on a pedal cover I came up with a way to bring the pedal up and closer to the brake pedal for easier heel and toe down shifts well this is how it works there are 3 studs coming out pretty far for the accelerator pedal assembly I went to home Depot and got a few 1/4 inch washers to bring it up now since your using washers you can tweak exam where the pedal is I went as far up as I could and as close to the brake pedal as possible which from the looks of it between the accelerator and brake pedal there is about 2 inch gap and the accelerator pedal sits about 1/4 inch lower than the brake pedal I my set up was 11 washers on the bottom 4 on the top left and 6 on the top right for me this brought the pedal up and as close as possible will add pictures later tonight hope it works out for you guys and this should work on any s550 mustang but will only be useful to the manual transmission owners
Sponsored