Gt350 manifold with procharger vacuum help.

[r1lovin]

Can any of you guys with the gt350 manifold and a procharger setup show me what you did with procharger vacuum block and the vacuum line that normally connected to the intake tube? I pulled that short vacuum line off the t, capped one side and plugged my vacuum block into the other. Thanks!

Sponsored

 

[ProChargerTECH]

Can any of you guys with the gt350 manifold and a procharger setup show me what you did with procharger vacuum block and the vacuum line that normally connected to the intake tube? I pulled that short vacuum line off the t, capped one side and plugged my vacuum block into the other. Thanks!

People either run that open line at the back to the "inlet" side of the blower or PCV. Leave it wide open, or place a small filter on it. The choice is yours.

Hope this helps.

 

[r1lovin]

I ended up capping it and running the vacuum box off the other because im using breathers. Everything seemed good! Thanks!

 

[Dominant1]

https://ibb.co/jqupLH

The way to go breathers.

Sponsored