Enochs build thread

[Enoch]

Ok guys.......and Manders

Please forgive my excitement but Due to a total lack of interest from the other half:doh: I had to tell someone, of my plans..

I've just dropped a rather large deposit, on an awsome set of wheels for my car....:hail:

So with that, and the rest of my planned mods, I thought I'd do a bit of a build thread showing progress as I go.....

It'll be a few weeks before I can really get into it, as I'm still waiting on parts from the USA, but once I start, I'll update this thread with my progress and my findings and opinions..... And I hope you enjoy it....:clap2:

The progress so far is as follows:gossip:

1. Ford Racing Borla Touring....fitted, but will be modified with the new resonator from Borla as its a bit to raspy for my tastes
2. Rear light vinyl fitted
3. Led's fitted to map lights, glovebox, boot, reversing, and rear fogs.
4. Ford racing oil seperator fitted.
5. Fitted Steeda jacking rails
6. Fitted pony deck lid

Planned..

Fit Led driving and side lamps
Bronze plastidip emblems
Tint glass
Fit Steeda F&R ARB's
Fit Steeda 1" lower linear springs
Fit Steeda Diff bushes
Fit Steeda subframe locating bushes
Fit BMR Cradle lock out kit
Fit sound tube delete
Fit Ford racing bump stops.....
Fit Steeda hood struts.

And finally for now.........Fit those wheels:hail::hail:

Sponsored

 

[Lazyitis]

What are the wheels Enoch? Please tell!

 

[Enoch]

What are the wheels Enoch? Please tell!

Now where would the fun be in that....... That's the one thing that's going to have to remain a secret until fitment day....

 

[slowhand99]

What are the wheels Enoch? Please tell!

yes, this! and pics please!

 

[Lazyitis]

Now where would the fun be in that....... That's the one thing that's going to have to remain a secret until fitment day....

Hmmmm...I deduce that they're bronze, aren't they...? ;)

 

[slowhand99]

Bullitts!

 

[Enoch]

Hmmmm...I deduce that they're bronze, aren't they...? ;)

Yes......they will have a custom bronze finish;)

Probably be a couple of months before they arrive, but I've got plenty to be going on with, and I'd prefer to wear out my current tyres before chucking a new set at it...

 

[Lazyitis]

Yes......they will have a custom bronze finish;)

Probably be a couple of months before they arrive, but I've got plenty to be going on with, and I'd prefer to wear out my current tyres before chucking a new set at it...

I'm going to get to the bottom of this in less than 2 months, don't you worry!

 

[Enoch]

I'm going to get to the bottom of this in less than 2 months, don't you worry!

Good luck...

 

[Gibbo205]

Yes......they will have a custom bronze finish;)

Probably be a couple of months before they arrive, but I've got plenty to be going on with, and I'd prefer to wear out my current tyres before chucking a new set at it...

Your doing what I was not brave enough to do, I was tempted by this finish on my MMR FS02 wheels:

Or a not quite as bling bronze.

Am playing it safe though and going with a machined/liquid silver colour.

 

[Centurion07]

That's^ copper though!

Anyways, unless you have a lowline jack you'll find the rails all but useless. I put my axle stands on them but I still have to use the jack on the unguarded pinch weld. :(

 

[Enoch]

That's^ copper though!

Anyways, unless you have a lowline jack you'll find the rails all but useless. I put my axle stands on them but I still have to use the jack on the unguarded pinch weld. :(

I have 2 low line jacks, and they work perfectly on the rails... Will still go under after I've lowered it

As for the wheels above.......I ain't that stupi........err I mean braveaddle:

 

[Manders Mustang]

[MENTION=13920]Enoch[/MENTION] Guys... and manders, you're right, i'm a God, thanks for realising my status as non-human and actual spiritual being.

Okay, we're allhappy to hear about this... NOW SHOW US. SHOW US THE PICTURES, IT'S THE DAMN LAW AROUND THESE PARTS ;)

 

[Enoch]

Shan't :lol::lol:

 

[markleigh]

Your doing what I was not brave enough to do, I was tempted by this finish on my MMR FS02 wheels:

Er... You forgot to wipe away the excess Copperslip

Sponsored