Brembo caliper pad pin punch

[Silver5.0]

When I was searching for videos for replacing brake pads on the Brembo 6 piston calipers, I noticed that most people didn't have the correct tool for removing the pins in the calipers. Yeah, a screw driver, punch or whatever else might get the job done for you, but I found the right tool for the job. And, it's specifically for Brembo brakes!

http://www.racingbrake.com/product-p/ccp01.htm

Shipping's a bit much ($10) but if your in southern California, they're in Fullerton. Give 'em a call and pick one up.

Sponsored

 

[ForTehNguyen]

that recess is nice so you dont mushroom the point of the pin. I used a deadblow to hit the pin flush with the caliper then pulled the pin out with pliers from the other side while holding down the retaining spring.

 

[timd38]

very nice! looks like an Allen head cap screw that was turned on lathe!

 

[Kuba]

very nice! looks like an Allen head cap screw that was turned on lathe!

:hail:

Sponsored