Boost input for guage

[Stevenjasmin]

Hey guys,

I looked for the port on the third runner to attach my tube for the boost guage, but can't find it. Could some one tell me where else I could tap into ? Pic would be super helpful. The guage came with a T fitting to use if needed. And just for reference it's a Paxton kit.

Thanks

Sponsored

 

[jwhite]

Interior package you have? If you have the oil pressure/ vac gauge you can simply buy the EB cluster and change yours out. EB gauge shows boost. Just plug it in at dash takes 10 min tops.

 

[Roh92cp]

My understanding is the Ecoboost gauge retrofit to the GT does not give an accurate boost reading. Have you verified this?

 

[jwhite]

Only with CJ pony!!! Lol mine seems to be pretty accurate from what I was told my boost levels would be from Brenspeed

 

[jwhite]

Reading your vehicle description, a question back to you. How do you like your Eiback suspension? I've got mine supercharged full exhaust Rauch axle back I need traction!!!

 

[Roh92cp]

Reading your vehicle description, a question back to you. How do you like your Eiback suspension? I've got mine supercharged full exhaust Rauch axle back I need traction!!!

The Eibach Pro kit is very nice, and rides very nice. The only issue I had is it needs to be lower in the front to give the proper look so I changed to the CJ Pony springs. Cj Pony springs are made by Eibach and lower the front 1.5 and rear 1 which gives a much better look. I have no drive time on the CJ Pony Springs yet as its winter here.

 

[jwhite]

Thanks that helps, that's my winter research and project. Still kinda mild here in northern Indiana. I've put away and got back out 3 times so far as we've got a couple warm weekends.

 

[Ruby red GT]

Any manifold vacuum source can be tapped for a mechanical boost gauge.

 

[jared89]

Dont wasted your money on the eco boost cluster. I bought one and was reading like 2psi. After looking into it more i found they are not accurate. I bought a real boost gauge but cant find any pods

 

[Stevenjasmin]

Thanks guys for all the input I ended up doing this.

http://www.mustang6g.com/forums/showthread.php?t=33321

Turned out great.

 

[Stevenjasmin]

I think it turned out pretty well.

 

[jwhite]

Looks very good, nice work!

Sponsored