Back in a Mustang

[TXHPE700]

Hey there,
So I’m finally back in the Mustang family after a 17 year break. I recently picked up a 2016 Mustang GT Hennessey HPE700 with 4975 miles. So I’ve been researching details regarding the 2.9 twin screw supercharger the original owner had installed. I’m wondering what upgrades I should look into. Also it has the 4.00 pulley, are they any gains if I go to a smaller pulley. Any assistance/feedback would be greatly appreciated.

Sponsored

 

[R&S Performance]

The 2.9's are solid blowers. It will be hard to say what upgrades you would need because theres no telling whats on the vehicle.

But for the 2.9's a good building spot would be getting the VMP Dual Pass Heat Exchanger with fans, if it doesnt have them.

Power modifications I would say 1000cc injectors with a BAP and you can pulley down to a 3.875 for 93. Ive gone smaller on others with E85.

If its manual get a clutch, if it's auto maybe look into a converter.

Should keep you busy for a while. Anything else you need or questions you might have give us a call.

Ryan
R&S Performance
512-243-6798