Are these truly SVE Wheels?

[Soulja4187]

So I was looking online for some wheels and found these wheels, are these truly SVE? Or did the seller just slapped on the center cap? The only manufactures that I been able to find that sell this style was P51 and MRR (M600).

Sponsored

 

[Sweetface]

They may be the sve gt7 wheel that was discontinued ...

 

[Soulja4187]

Thanks, that helped alot. How much do you think a set of these with tires should cost. They are used.

 

[shogun32]

both the MRR and SVE come from the same factory in China. The SVE is just the 'whitelabel' version. $600/set of wheels is not uncommon. Tire price are all over the map but 50-75% of new price for "almost" new tires is not uncommon.

 

[Soulja4187]

both the MRR and SVE come from the same factory in China. The SVE is just the 'whitelabel' version. $600/set of wheels is not uncommon. Tire price are all over the map but 50-75% of new price for "almost" new tires is not uncommon.

Thanks for the feedback. The guy selling the wheels and tires wants $1400 for them. I think its a bit over priced.

 

[blind*guardian]

What kind of tire does he have on them? Some tires cost close to that new.

 

[Soulja4187]

They are Bridgestone

 

[Cobra Jet]

How much tread is left on the tires? Ask Seller to use a gauge to demo the amount of tread left AND ask for pics to see if the tread is evenly worn from outside to inside.

Also make sure the rims are not damaged by cracking or curb hits.

 

[Soulja4187]

How much tread is left on the tires? Ask Seller to use a gauge to demo the amount of tread left AND ask for pics to see if the tread is evenly worn from outside to inside.

Also make sure the rims are not damaged by cracking or curb hits.

He said he doesn't have a gauge. On the new pictures he took you can see some curb damage that was just painted black without any prep. The tires he has on are 110W. I asked him to take pictures of the manufacture's date stamp but he doesn't seem to understand so my next option is to see the wheels in person but I still think 1400 is still to high

 

[Soulja4187]

Ohh will I have any clearance issues with the 315/35r20 on the rear? The rears are 11 inch wide

 

[bluebeastsrt]

I doubt you’ll have clearance issues. But who can tell for sure without knowing the offset? I I ran 325s on a 10.5 inch wheel on my old 15GT. I don’t think the cost of those is to out of wack. Most wheel/tire packages run between 18-22 hundred dollars on AM or LMR. For brand new similar material wheels.

 

[Soulja4187]

The rears are Offset +50mm 20x11

Sponsored