Anarchy Motive Introduction Thread

[Anarchy Motive]

Allow me to introduce myself, I am Derrick from Anarchy Motive. For the past 4+ years I have offered knobs for the WRX/STI/BRZ/FRS/ST/RS community. It is now time to bring some really awesome shift knobs to the S550 community. Anarchy Motive, a Missouri based outfit makes the heaviest and baddest shift knobs on the market, right here in the good 'ol USA! Quality, Fitment and Affordability come standard on this product.


What Makes These Knobs So Special?
- Staggering 671 grams (1.47lbs) or 588 grams (1.29lbs) for the collarless version!!! Weight like this at the end of the shift lever helps engage gears smoother and with more ease!
- Solid American Steel with 1 piece construction
- Massive 2.15-inch diameter, fits comfortably in most hands (Ideal for those who shift from the top and from the side)
- Reverse lock-out compatibility built-in
- Extra Thick Powder-coated finish helps prevent severely hot or cold conditions

Below are some pics of our work.
IMG_20151007_155436 by Derrick Tackett, on Flickr

2015-09-30 17.10.39 by Derrick Tackett, on Flickr

2015-08-31 15.41.19 by Derrick Tackett, on Flickr

2015-08-27 13.43.00 by Derrick Tackett, on Flickr

Knobs (19 of 23) by Derrick Tackett, on Flickr

Knobs (16 of 23) by Derrick Tackett, on Flickr

Knobs (9 of 23) by Derrick Tackett, on Flickr

Knobs (4 of 23) by Derrick Tackett, on Flickr

Knobs (3 of 23) by Derrick Tackett, on Flickr

We offer a wide variety of colors
Colors
-Gunmetal
-Tiger Blue
-Purple Haze
-Pearl White
-AutoX Cone Orange
-Asphalt Black
-Galaxy Black
-Lime Juice Green
-Area51 Silver
-Rough Red
-Tiffany Blue
-Sunflower

And we can engrave just about anything you want on a knob. Our knob has all of the previsions for the Mustang reverse lockout and fits just like an OEM knob should. All knobs have a 2 year warranty on the powdercoat and a lifetime warranty on the physical knob itself.

If you have any questions about the knobs or anything else, hit me up here and I'll do my best to answer them.

My current pricing is $105 for a knob and $35 for engraving. But I will be going a mustang6g introductory group buy where the price of the knob will be $70 and engraving will be $25, that is a shipped price. I will probably be starting that on Saturday.

Look forward to bringing my product to this awesome community!

Thanks!

Sponsored

 

[Evil Minion]

Damn, where were you 2 months ago! lol

Already got a Flossy heavy, but I'll be sure to recommend others your way.

(assuming your customer service is better than Flossy, which shouldn't be difficult... haha)

 

[Anarchy Motive]

I try and pride myself on customer service, I work very hard at it.

First let me say that your work, customer service, and creativity are unmatched. I've been in management for many years and I've coached many people on their customer service skills and I must say that people could take lessons from you. You should be very proud. I'm sure your family is proud of you too.

That's a snippet of a PM from a customer of mine. You're good to customers, they're good to you. I have quite a few customers who've bought multiple knobs, just to change them out.

I'd be willing to bet you'd like my knob better, just sayin haha. Once the group buy is up you should take a look!

 

[Evil Minion]

...

I'd be willing to bet you'd like my knob better, just sayin haha. Once the group buy is up you should take a look!

I was seriously thinking about it. Do you have yellow powder coat?

 

[Anarchy Motive]

I was seriously thinking about it. Do you have yellow powder coat?

Yep

Knobs (2 of 23) by Derrick Tackett, on Flickr

It's called sunflower, it's a yellow with a super light fine metallic.

 

[Evil Minion]

2015-08-31 15.41.19 by Derrick Tackett, on Flickr

Yep

...

It's called sunflower, it's a yellow with a super light fine metallic.

I meant the matte version of the yellow, like the rough texture ones at the bottom row of the picture above?

 

[Anarchy Motive]

I don't have a textured version, however, I can have a matte clear coat sprayed over it.

 

[Evil Minion]

That could work. Would the surface look like the black ones in that picture? Just yellow, obviously

 

[Anarchy Motive]

It'd be a bit less of a roughness, but it would have a slighter texture.

Also, I only have 6 posts in here per day. I'd love to talk with you about colors all day. Shoot me a PM if you have some pointed questions and I can see if I can get a sample for you or answer more directly.

 

[evo8904]

When I had a Subaru parts business, I sold Anarchy shift knobs. They are extremely high quality and amazing. I still have 20 in my garage that I never got around to selling lol.

 

[SeanR]

I'm interested in the red superman knob you had. I just have a couple of questions. Is the red a match for redline? I don't want the two colors to clash. Also, is it possible to make the superman symbol bigger? Thanks in advance.

Sean

 

[Anarchy Motive]

I'm interested in the red superman knob you had. I just have a couple of questions. Is the red a match for redline? I don't want the two colors to clash. Also, is it possible to make the superman symbol bigger? Thanks in advance.

Sean

Yeah, we can do that. I have two reds, they probably split the difference. It's hard to match paint with powdercoat.

As far as the size, if you blow it up too large then you'll end up with distortion. I can scale it as large as possible without distortion.

 

[byklin]

sub'd for when the group buy starts :clap2:

 

[OySmallFry@SCS]

In for group buy as well.

What's the difference between the two weights / collared vs uncollared?

 

[Evil Minion]

In for group buy as well.

What's the difference between the two weights / collared vs uncollared?

...
- Staggering 671 grams (1.47lbs) or 588 grams (1.29lbs) for the collarless version!!! ...

Patiently waiting for group buy

Sponsored