Project 6GR Wheels Ford S550 Mustang GT500 GT350 GT V6 ECO

[sigintel]

What kinda pics?

I would like to see more of this aswell.

Tech detail pics?

Its likely going to get the Ford track kit and get lowered modestly.
Car has been driven very hard and logged some flight time without bending wheels.

Needs nicer lug nuts in black. PM any suggestions.
... is there a black nuts thread?
Maybe some short splines?

Sponsored

 

[AttiS550]

So I finally got around to mounting these today. Ran into a bit of an issue. The right side looks amazing, they sit fairly flush with the fender, maybe poking out a tiny bit. The left side both the front and the back are poking out a solid half inch and it simply does not look right. I am not sure why this might be, has anyone had this same issue? Any tips would be appreciated!

 

[Badluck]

Meaty

 

[thumper]

So I finally got around to mounting these today. Ran into a bit of an issue. The right side looks amazing, they sit fairly flush with the fender, maybe poking out a tiny bit. The left side both the front and the back are poking out a solid half inch and it simply does not look right. I am not sure why this might be, has anyone had this same issue? Any tips would be appreciated!

for the rear... steeda IRS alignment kit:

http://www.steeda.com/steeda-s550-mustang-irs-subframe-alignment-kit-2015-all-555-4438/

as for the fronts... is it a camber alignment issue?

 

[AttiS550]

for the rear:

http://www.steeda.com/steeda-s550-mustang-irs-subframe-alignment-kit-2015-all-555-4438/

as for the fronts... is it a camber alignment issue?

I have camber plates up front so I'm going t take it to a shop and see what they say. I am hoping it is safe to drive for now ....:doh::doh:

 

[thumper]

any pics of this?

 

[AttiS550]

any pics of this?

Yeah about to get home and I'll post some up

 

[AttiS550]

doesnt look right

So the right side looks fine to me but then the left side the rear pokes out from the fender about 1/4-1/2 inch

^thats the right side

^thats the left side

^right side

^left side

^right

^left

I drove it about 25 minutes home and I felt like there was some vibration. It wasn't bad and it could have been the new lower profile tires and they were at about 37 psi. I aired them down to about 32 psi but havent driven it since.

I don't know of any good local shops so I called Firestone (they have done some tire stuff for me before) and am going to bring it to them tomorrow to have them take a look.

If anyone has any thoughts as to why this looks like this i would be very grateful for your input

 

[Badluck]

So the right side looks fine to me but then the left side the rear pokes out from the fender about 1/4-1/2 inch

^thats the right side

^thats the left side

^right side

^left side

^right

^left

I drove it about 25 minutes home and I felt like there was some vibration. It wasn't bad and it could have been the new lower profile tires and they were at about 37 psi. I aired them down to about 32 psi but havent driven it since.

I don't know of any good local shops so I called Firestone (they have done some tire stuff for me before) and am going to bring it to them tomorrow to have them take a look.

If anyone has any thoughts as to why this looks like this i would be very grateful for your input

Look like the IRS is not aligned. There are 4 blue subframe bolts the mounts the IRS to the car. Steeda sells something to fix that or the Ford dealer can align it in 45 mins. then a 4 wheel alignment after that

 

[AttiS550]

Look like the IRS is not aligned. There are 4 blue subframe bolts the mounts the IRS to the car. Steeda sells something to fix that or the Ford dealer can align it in 45 mins. then a 4 wheel alignment after that

I am hoping firestone will be able to help me out tomorrow otherwise ill take it to the dealer on monday

 

[AttiS550]

Bonus Sexy Pic

here is a pic of the side that looks right and wow they are so beautiful

 

[Badluck]

here is a pic of the side that looks right and wow they are so beautiful

Looks like the car is lowered. Probably happened then. There is a hole that helps align the IRS back in position near the blue subframe bolts

 

[AttiS550]

Looks like the car is lowered. Probably happened then. There is a hole that helps align the IRS back in position near the blue subframe bolts

Yeah the car is lowered on Steeda Progressives

is the car unsafe to drive at this point? All the lugs are torqued to 115

 

[Badluck]

Yeah the car is lowered on Steeda Progressives

is the car unsafe to drive at this point? All the lugs are torqued to 115

I have the same springs

 

[Faisal]

Finally got these bad boys on.
I'm running on Vogtlands sport plus springs.
The guys that installed them on my car were looking at me like I'm crazy cuz of how low the car is and how wide the tires are :lol:
I'll post pictures once I figure out how I can upload here from my phone.

Sponsored