Airbag warninglight bypass with aftermarket seats?

[Grintch]

Has anyone figured out the best way to get rid of the airbag warning light when running aftermarket (non airbag) seats? Like what resistance is it expecting, is it different for the passenger side vs driver side? Other tips?

Sponsored

 

[JohnD]

Apparently you can solder a resistor in there to shut it off. I read 3 - 4 ohms on another forum, but do some research on that, I can't guarantee the accuracy of the number.

 

[taylor.crandall1]

[ame="[MEDIA=youtube]6Lm3MxQZskg[/MEDIA]"]

 

[Tobey]

Two 2.2 ohm resistors will do it. See my post at the end of this thread:

https://www.mustang6g.com/forums/showthread.php?t=74306

I didn't take a picture, but I just bent the prongs on the resistors and stuck them into the connector. Then wrapped it in electrical tape. Pretty simple.

 

[Peedystablo82]

Does not work. Thanks though.

 

[taylor.crandall1]

Does not work. Thanks though.

See post #9. Maybe that will help
https://www.mustang6g.com/forums/threads/gt350-recaros-in-a-2016-gt-mustang-air-bag-light.131615/

Sponsored