Sponsored
305/35 MPSS on the front?
- Thread starter RaceRed350
- Start date
- Watchers 7
snaproll
Well-Known Member
- Joined
- Feb 17, 2016
- Threads
- 2
- Messages
- 378
- Reaction score
- 181
- Location
- Naples Florida
- First Name
- Bruce
- Vehicle(s)
- 350R/88LX/FR500S
I like your answer. Tell us more! You have the setup? No clearance issues?
snaproll
Well-Known Member
- Joined
- Feb 17, 2016
- Threads
- 2
- Messages
- 378
- Reaction score
- 181
- Location
- Naples Florida
- First Name
- Bruce
- Vehicle(s)
- 350R/88LX/FR500S
G
I purchased the “square” setup with 50mm offset and it appears that the 25mm in front spacer is indeed the right call. I have a finger width between the strut and tire with the tire off the ground. I didn’t look at it on the ground before I rolled in the garage tonight.
The Motorsport tech spacers fit tight like suction cups - very impressive and will cost me a lot since I’m going to have to throw away the spacers I use on my race car! The 305/35 looks really nice bolted up up front and rear. No real “poke” more than it had before though the fronts a bit more flush looking. Still need to drive it. :cheers:
I realize now you were referring to the original or R spec front specific offset.
I purchased the “square” setup with 50mm offset and it appears that the 25mm in front spacer is indeed the right call. I have a finger width between the strut and tire with the tire off the ground. I didn’t look at it on the ground before I rolled in the garage tonight.
The Motorsport tech spacers fit tight like suction cups - very impressive and will cost me a lot since I’m going to have to throw away the spacers I use on my race car! The 305/35 looks really nice bolted up up front and rear. No real “poke” more than it had before though the fronts a bit more flush looking. Still need to drive it. :cheers:
Sponsored
