2019 Mustang GT Goes 9s on Beefcake Special Edelbrock first trip out!!!

[beefcake]

Our customer Heinz S. back at it again with his newest 2019 A10.

E85, 10-11 psi pulley and a custom tune, along with some stickies and here we go!!!

First trip out knocking down 9.90@142 mph!!! Soft launch on the stock driveshaft!!!

Heinz opted for one of our Beefcake Special packaages with id1050s, drop in dw pump, and BAP, along with a 10-11psi pulley. Our installation partners at Finish Line hooked it up and then we hit the rollers on our in house dyno and made 717 rwhp!

heinz loaded up and headed back up north to canada and was very pleased with some 9's! Now he's ready for a driveshaft and hoping for some 9.7s!!\

Sponsored

 

[Stymee]

Complete mod list?
Thar car is fast, real fast...

Do u hear the trans slipping slightly or is that my imagination?

Sick build

 

[revinto7]

wheres demonology now !!!!

 

[Monopoly]

Thats amazing! Stock half shafts too? Also interested in the parts list.

 

[80FoxCoupe]

Nice work!!!

 

[Myshelby3425]

Complete mod list?
Thar car is fast, real fast...

Do u hear the trans slipping slightly or is that my imagination?

Sick build

Nope, sounded good to me

 

[Myshelby3425]

Our customer Heinz S. back at it again with his newest 2019 A10.

E85, 10-11 psi pulley and a custom tune, along with some stickies and here we go!!!

First trip out knocking down 9.90@142 mph!!! Soft launch on the stock driveshaft!!!

Heinz opted for one of our Beefcake Special packaages with id1050s, drop in dw pump, and BAP, along with a 10-11psi pulley. Our installation partners at Finish Line hooked it up and then we hit the rollers on our in house dyno and made 717 rwhp!

heinz loaded up and headed back up north to canada and was very pleased with some 9's! Now he's ready for a driveshaft and hoping for some 9.7s!!\

Runs good for those numbers. 717whp seems low for a stage 2 kit on e85. Shouldn’t that be high 700-800+?

 

[beefcake]

we don't get hung up on dyno #s, only # we care about are the track #s

 

[ugstang17]

Nice job.

I share your sentiment in that statement. A dyno number is for bragging rights at a car show. An ET tells the real story on what the car can do.

 

[80FoxCoupe]

we don't get hung up on dyno #s, only # we care about are the track #s

Atta boy!

 

[95 marty]

Exactly what is that e85 fuel kit? How much with the 1000 injectors

 

[Stymee]

we don't get hung up on dyno #s, only # we care about are the track #s

Absolutely and the cars flying for sure but it would still be nice to hear the complete build to running this ET

Headers, cats, exhaust, interior in the car, skinnies and bigs etc?

Very impressive

 

[Myshelby3425]

Exactly what is that e85 fuel kit? How much with the 1000 injectors

The injectors are needed with 93 also.

 

[95 marty]

I already have a whipple stage 2 kit. Just wondering if the deutch work pump is the same to where I can install a boost a pump with injectors so I can run e85

 

[TehEno]

That is pretty impressive. Would like to get an aftermarket tune as no doubt it would give it more but have to stick with Roush for my warranty.

I know the OP is talking about Edelbrock, just mentioning that tunes make a huge diff also

Sponsored