2011-14 Vortech bracket on s550

[GT2]

Hey guys, I was doing some searching to try an piece together a vortech system (already have a blower from my last car well current car I bought from Beef Cake). I figured that the old coyote should be pretty similar to the new one bracket wise (similar mounting points etc) and I found that the 2011 bracket had pretty much all the parts you need (One extra, missing I think two spacers), to mount a vortech head unit to an s550.

Yes I realize I can just ask Beef or Vortech themselves to sell me all the parts minus the head unit, but I'm a DIY'er (for the most part). Maybe someone will have use for this info?

Here's the parts list. Asterisk next to the things that are in the 2011-14 bracket kit. You're still missing intake/intercooler/bov or bypass if you prefer, but those are much much more universal parts you could absolutely put together yourself for not very much $ (but plenty of headache).

2A017-875-27 SPACER, .875OD X .404ID X 1.895L 4 *
2A017-875-28 SPACER, .875 OD X 2.730 LONG 1 * 1 extra
2A017-876-13 SPACER, .875OD X .328ID X 2.730L 2 *
2A017-876-14 SPACER, .875OD X .328ID X 2.058L 2
2A017-876-15 SPACER, .875OD X .328ID X 2.146L 1
2A017-876-16 SPACER, .875OD X .328ID X 1.928L 1 *
2A046-031 BELT, 6 RIB X 103.31 EFF. LENGTH 1 *
4FQ010-011 MNTG PLT, OUTER, 2011 MSTG 5.0 1 *
4FQ010-021 MNTG PLT, INNER, 2011 MSTG 5.0 1 *
4FQ017-021 SPCR, .875/1.25OD X .328ID X 1.782L 1 *
4FQ017-031 SPCR, .875ODX.404IDX.363L W/.66 PLT 4 *
4GF016-161 PULLEY, 3" IDLER, GROOVED, MOD 1 *
4PCS016-160 PULLEY, IDLER, SRT10 TRUCK 1 *
4TX016-150 IDLER, 2.75 DIA, SMOOTH, 7 RIB 2 *
7A375-126 3/8-16 X 1.25 HHCS, GR8, PLT 5 *
7A375-352 3/8-16 X 3.5" HX HD GR8 5 *
7C080-064 M8 X 1.25 X 65MM BHCS CL10.9 1 *
7C080-081 M8 X 1.25 X 80 HXHD CL10.9 1 *
7C080-101 M8-1.25 X 100 BHCS CL10.9 1 *
7C080-200 M8-1.25 X 200MM STUD, 35MM THREAD 2 *
7F008-021 NUT, M8 X 1.25, SERRATED FLG 2 *
7J312-000 5/16 FLAT WASHER-SAE 3 *
7K375-040 3/8 AN960 FLAT WASHR PLATED 9 *

Sponsored