15% od dampner

[Gremlinsteve]

When running a tvs 2300 and installing an ati dampner (pn918053) which is listed as an 8 rib dampner at 15% overdriven. Do I need to also use a low profile tensioner with the dampner

I'm getting conflicting information

Steve

Sponsored

 

[olaosunt]

Yes

 

[Gremlinsteve]

So I'll need the vmp tensioner but not a water pump pully.

Thanks

 

[olaosunt]

You will need both if you want to run the 15 % damper .
The water pump pullley is included with the 8 rib upgrade kit.
http://www.vmpperformance.com/VMP-TVS-Roush-TVS-8-rib-drive-conversion-COMPLET-p/50l8rib.htm
I had the kit on my 12.
I spun that TVS to hell and back as I also had a snake bite drive (1.3 ratio).
I saw about 19 psi with the 75 mm 8 rib pulley /15% OD/snake bite .

 

[Gremlinsteve]

How about the innovators west 10%
Will that require anything else

 

[olaosunt]

Sorry man.
Don't know .

 

[olaosunt]

I think the problem is once you increase the size of the lower ,the stock water pump pulley is in the way .

 

[Gremlinsteve]

Gotcha

Sponsored