...

[PC 2015]

FML I feel like I should of just paid someone to do the install but anyway!!!! Just finished my stage2 whipple install yesterday on my 19. It was running great. Went to get alignment tonight and watched the whole time so I know they didnt do anything. But they started the car on the rack and then I got a Notification on my ford app check engine light came on. So when they brought the car down I ask for their scanner tool. It says low fuel pressure. Just took pump back out everything looks good. And under the hood looks good no leaks or anything. I am on whippled tune. Any help would be much appreciated.

Thanks
Joe

Sponsored

 

[Det_Riot]

Double check all of your hose clamps on the pump and make sure nothing is loose. Then double check all of the connectors to make sure nothing is damaged or coming apart

 

[PC 2015]

Double check all of your hose clamps on the pump and make sure nothing is loose. Then double check all of the connectors to make sure nothing is damaged or coming apart

Shit I thought I didnt post this lol. So after i took the pump out and everything was ok. I knew I was low on gas and was going to get gas after the alignment, but didnt think this would happen. The rack was so big we had to put 2x4 under the tier so it didnt bottom out. I think it was starving for fuel and when they restarted on the rack there was air in the line. I filled her up cleared the code and she runs like a beast now. I usually dont let the gas get that low but shit happens I guess lol.

 

[Det_Riot]

Good Stuff glad to hear it!

 

[Notheryote]

Yea I’m trying to stay above a quarter at all times now as whipple cautions about possibly running lean below 1/8 if you accidentally go wot or anything.

 

[Notheryote]

Good Stuff glad to hear it!

What’s up man, how’s the engine build going?

 

[Det_Riot]

What’s up man, how’s the engine build going?

Engine's being assembled as we speak! Hopefully every will be ready to go back in the car in the next week or two, I stopped by the shop Wednesday and they had just finished the final fit for the rings.

 

[Notheryote]

Engine's being assembled as we speak! Hopefully every will be ready to go back in the car in the next week or two, I stopped by the shop Wednesday and they had just finished the final fit for the rings.

Cool, looking forward to seeing what it can do.

 

[PC 2015]

Yea I’m trying to stay above a quarter at all times now as whipple cautions about possibly running lean below 1/8 if you accidentally go wot or anything.

Yeah I've learned that lesson. This was actually my first fill up. But from here on out I'll stay above a quarter tank.

Sponsored