MyGauges Question

control4userguy · Feb 7, 2018

I called-up gauges today and it brought up several parameters reading in digital form. I then went back to configure to select something else and then returned to gauges only to find three analog dials. Can't get back to the digital readouts.

What happened that would allow digital (line-by-line) readout of more than three parameters in the info screen?

Hivel · Feb 7, 2018

control4userguy said:
What happened that would allow digital (line-by-line) readout of more than three parameters in the info screen?

Use the right hand up or down steering wheel buttons to cycle through the gauge displays. One of the displays is blank...

control4userguy · Feb 7, 2018

^I got it now. Arrow up/down at any time to get to the readouts and g-meter. Thanks.

Deleted member 33561 · Feb 9, 2018

I've never seen the "digital" gauges. When I use the up/down arrows I get a couple more different gauges but still analog. I wish it had a digital tach somewhere.

HeavyMetalMonk · Feb 9, 2018

7thStreetJim said:
I've never seen the "digital" gauges. When I use the up/down arrows I get a couple more different gauges but still analog. I wish it had a digital tach somewhere.

I'm really confused by this post. The whole dash is digital. There's 3 different digital tach options, one of which has a numerical readout as well (track).

Deleted member 33561 · Feb 9, 2018

Are you sure you know what "digital" means? A digital tach would read "1943" rpm and not a "bar graph" with some numbers to the side.

emcee1011 · Feb 9, 2018

7thStreetJim said:
Are you sure you know what "digital" means? A digital tach would read "1943" rpm and not a "bar graph" with some numbers to the side.

Seems like a lot of people take out "LCD" when technically it's "digital LCD".

Deleted member 33561 · Feb 9, 2018

Well there are some digital readouts in the display. The speedomoter is digital when it reads "22" mph. So are the odometers, trip odometers, etc. But the tach and things like oil pressure, intake air temp and cylinder temp are all analog displays in the form of bar graphs with occasional numbers beside the markings to give you an idea of what you are reading. Reading the air intake temp takes time to count the markers between zero and 200 degrees with larger markers helping at 50 degree intervals.

HeavyMetalMonk · Feb 9, 2018

7thStreetJim said:
Are you sure you know what "digital" means? A digital tach would read "1943" rpm and not a "bar graph" with some numbers to the side.

You mean like the digital "1943" readout when your RPM is at 1943 and you're using the track readout?

Deleted member 33561 · Feb 9, 2018

I have never seen that ! I've had my car 2 weeks and I have not seen anything like that. Show me a picture or tell me how to get that display please. It's one of my pet peeves that I had no digital tach,

control4userguy · Feb 9, 2018

Let me clarify. Three analog dial gauges is what you get when you select SHOW GAUGES. Without doing anything else, hit the down arrow to start toggling through what shows in the info screen. There will be an option that displays line-by-line digital data. Now the strange part about this selection is there does not appear to be any way to configure the displayed parameters.

Deleted member 33561 · Feb 9, 2018

Picture? I can't get anything like that either.

HeavyMetalMonk · Feb 9, 2018

control4userguy · Feb 9, 2018

This is the digital readouts I'm talking about. They are canned- no way to customize parameters?

HeavyMetalMonk · Feb 9, 2018

Oh, I see what you mean- I think I was misunderstanding your question.

MyGauges Question

control4userguy

Well-Known Member

Hivel

Well-Known Member

control4userguy

Well-Known Member

Deleted member 33561

Guest

HeavyMetalMonk

Well-Known Member

Deleted member 33561

Guest

emcee1011

Well-Known Member

Deleted member 33561

Guest

HeavyMetalMonk

Well-Known Member

Deleted member 33561

Guest

control4userguy

Well-Known Member

Deleted member 33561

Guest

HeavyMetalMonk

Well-Known Member

control4userguy

Well-Known Member

HeavyMetalMonk

Well-Known Member

Similar threads