Does anyone have an online template for the stock spoiler holes?

Captdistraction · Sep 20, 2016

I have a carbon dynamics trackpack spoiler sitting here but no template.

I can work on making my own, but wanted to see if anyone had a template available for the holes on the factory spoiler.

Captdistraction · Sep 23, 2016

bump, even measurements for just the two outer holes would be a start for me, I can get the left-right dimensions from the spoiler within some margin of error, but I'm struggling with the measurement fore/aft on the car.

jbailer · Sep 23, 2016

I looked for the same a while back and never found anything. I think several spoilers re-use the factory holes if they exist. For those of us that our car came with spoiler delete, we have no reference point. I hope you have better luck than I did.

Captdistraction · Sep 23, 2016

I found this:

http://www.steeda.com/index.php?dispatch=attachments.getfile&attachment_id=496

but it uses the factory holes as its reference point. Reaching out to Carbon Dynamics went predictably nowhere.

NoReins · Sep 23, 2016

have you reached out to a local Ford Dealer that has their own body shop to see if they have a template available? They may have something available if one of their Customer purchased a spoiler delete car but wanted a spoiler added.

Captdistraction · Sep 23, 2016

CD replied quickly on facebook, here is the template:

https://www.dropbox.com/s/y1y3esjbrnv7z3o/TrackPack Template.pdf?dl=0

I'll also rehost it in case it disappears.

Does anyone have an online template for the stock spoiler holes?

Captdistraction

Not the Stig

Captdistraction

Not the Stig

jbailer

Well-Known Member

Captdistraction

Not the Stig

NoReins

Well-Known Member

Captdistraction

Not the Stig

Similar threads