Here's a video of the car at the strip. This was a 10.48 @ 134.6mph.
Sponsored
I don't feel drag radials will hook in 1st gear therefore I wanted something to get full traction, as were performing transmission testing. Its possible drag radials would work, but I need the trans to be 100%, once that's done, we will do some more testing. But I had to make sure it would shift with traction. It actually bumped the limiter in 1st and 2nd, then short shifted 6th to 7th at 6700. We're now comfortable with where we can command shifts and control this thing, so next time to the track, it will have an extra 300rpm per gear and will go through the lights in 6th. The MPH is going to go up drastically.Looks great ! I am curious why you are using slicks vs a drag radial on an auto .
Less chance of breaking half shafts but may be giving up 1-2 mph ?
So you guys are using the BMR Part#CB005 Cradle Bushing Lockout Kit and up graded half shafts?CongratsI don't feel drag radials will hook in 1st gear therefore I wanted something to get full traction, as were performing transmission testing. Its possible drag radials would work, but I need the trans to be 100%, once that's done, we will do some more testing. But I had to make sure it would shift with traction. It actually bumped the limiter in 1st and 2nd, then short shifted 6th to 7th at 6700. We're now comfortable with where we can command shifts and control this thing, so next time to the track, it will have an extra 300rpm per gear and will go through the lights in 6th. The MPH is going to go up drastically.
During testing on another car, half shafts without a bushing kit is borrowed time doing lots of launches with traction. They wheel hop quite a bit. So the bushing kit is first, half shafts are second.
Yes, BMR Bushing lockout kit and DSS half shafts.So you guys are using the BMR Part#CB005 Cradle Bushing Lockout Kit and up graded half shafts?Congrats
Track hasn't been open to go back, but were ready. Its open this weekend but not sure if we can get there.Any more results ?
Gen 3 + A10 = Your gonna go fast!It's done ! pulled the trigger on gen 3 for my 2 day old 18 GT/A10/PP1
Did you guys get back to the track yet ?Track hasn't been open to go back, but were ready. Its open this weekend but not sure if we can get there.