Folks, I though it was just my headlight bulb, but after changing it and checking the fuse. Still no bueno.
Is it common for the actual ballast itself to take a dump?
Side note
I can’t even begin to describe my amazement with the BMR lowering springs. I almost wish I did the struts and shocks too. The car rides 5x better than stock
How is that possible? Are springs different now from when I last did them 15 years ago? I remember lowering cars and then...
PP wheels off my 2017, 17k miles on the wheels. Factory lugs and wheel lock included. 7k miles on rear ties, 17k on front tires. 255 40 19 pirelli p zeros all around. Some rash on one wheel and a large chip on another, both pictured. Reason for 255 rear tires was hitting a piece of metal on...
Hey folks , I have the very common 2 piece spring compression tool which worked fine removing the stock springs from the front struts.
When trying to get the new lowering springs on, the rods of the spring compressors hit the strut body.
Other than cutting the rods shorter, what are my options?
I’ve had random misfires with mcleod twin disk setup as well.
to no avail I get them randomly. Lund said logs look good. No indications of actual misfires
I’ve also done kam reset and crank relearns . I did see a post on here about needing to depress the clutch for the relearn… maybe that will...
I’d rather not have a harsher ride , the 35 really limits you, no mps4 for instance
guess I’ll research other tires
want to run 305-315 35 19 rear
275-285 35 19 front
Im looking at running staggered SVE SP2s, but want specific tires some of which only come in 30, not 35 series. 305 or 315 in rear and 275 or 285 up front
MPS4's for instance only come in 305 or 315 30, not 35
should i look for a different tire and stick with 35s?
front
Size: 19x10...
I think you should be good with just the kooks green cats on their own?
mad for visual inspection, that was never my issue.They couldn’t pass me simply because the codes, they didn’t care about headers/exhaust . Ymmv