Search results

Sound Wave, My issue is similar to the OP. I have a gap but the knob does not thread on easy like the factory one did coming off. I cant turn it any tighter and i still have enough travel for the reverse lockout. I have only had the factory knob on and never had loctite nor do I need loctite.

Just installed tonight. I had same issues. I was afraid I had started to cross thread. I removed it and inspected the threads and they were fine. The pitch of the threads is the same but I believe the shape of the threads has some interference. after several installations and removals it...

Just remember if you are doing it your self, " ***TURN OFF MODULE POWER*** " means press your start button to turn the car off. Then turn the car back on when prompted " ***TURN ON MODULE POWER*** ". DO NOT DISCONNECT the OBDII plug or the USB cord to your laptop.

Drove a manual non performance pack and a performance pack EB back to back when I got mine. By far the cheapest way to get a lot of these mods. Breaks, springs and sway bars (body roll/nose dive), and the 3.55 gears in the dif. All of the performance was noticeable in their respective areas...

EB with performance pack owner Best advice go to a dealer and drive them back to back. What the performance pack is: unique front air splitter; larger radiator (GT part); upsized rear sway bar (GT part); heavy-duty front springs (GT part); unique chassis tuning; larger brake rotors with...

@justme97 , I did not flash it twice. After I flashed it and turned the power off and back on it said successful. CAUTION: If your ProCal aborts programming due to low voltage or if the programming process is interrupted for any reason, you can simply repeat the flash process, however, it...

The people at Ford Performance are extremely helpful. Did the same thing, we finally figured out the problem was my understanding of what "turn off module" meant. Per ford performance support the last step "turn off module" means turn the car off. you will then be prompted on screen to "turn...

Everyone is speculating two different power/performance level 2.3T. No one is speculating about an AWD 2.3T. With the shift to SUV and crossover heavy line up using the 2.3T why not develop an AWD that works in the mustang and adapt it to the larger vehicles?

Why they have the screen say "Turn power module off" and not just "Turn car off" I can’t think of a good reason. If you read the downloadable pdf there is a step in there where it says for you turn your car off. For those who got too excited and did not read the last step ford performance made...

I noticed that the other day.

Several online vendors have found and quoted the CARB number: D-598-18. Check the link below. https://arb.ca.gov/msprog/aftermkt/devices/eo/D-598-18.pdf

Will have to see as they keep adding info to the page. I thought their big selling point was that it would be CARB approved. But that No could just be a pending toggle. I bought an ecoboost because I thought I had a better chance of CARB supported parts vs V6 and that torq with a tune. I was...

Try this. https://performanceparts.ford.com/part/M-9603-M4

M-9603-M4 is now listed on the ford performance page for $699. With a grain of salt as not all the blanks are filled in and CARB says "no" at the moment.

It's here. https://performanceparts.ford.com/part/M-9603-M23

First post. Just my 2c This new filter should have a more surface area than the stock filter which will be able to provide the same filtration as stock but permit higher airflow cfm. The pro cal will update the map for increased airflow parameters otherwise the computer will compensate...