Search results

I purchased an IKON aluminum GT500 hood for my 2015 GT. I am very happy with it. There were a few small imperfections that required some work but not unexpected. My issue is with the windshield washer nozzles as they do not fit the intended location on the hood. It seems to be set up for them...

So let's continue. (Read part 1 to get current; lol) Current day. I began to hear a clunk when Iet off the accelerator or engaged the clutch. Once again, I dug out my favorite Sherlock hat and commenced the chase. After an extensive search ( which also includes checking torque on every bolt/nut...

So this may take a minute. Earlier this year I noticed a slight whine from the rear-end at hwy speed on my 2015 GT PP1 manual with a 3.73 gear and stock powertrain. I have owned this car for 6 yrs and it was purchased from the dealer in question. It had 21k on it and currently has approx. 55k...

I recently got an Ikon GT500 rep hood for my 2015 S550. It has provisions for what appears to be factory washer nozzles. Unfortunately, they don't fit. I tried to get some info from Ikon to see if I need to use something else but of course, they were useless. Has anyone encountered this issue...

Hey everyone, Does anyone have a source for the front caliper rebuild kit for a 2116 GT350? I had my front calipers powder coated and some of the seals got damaged when removing. Thanks for any help!

I have installed OE gt350 brakes on my 15 gt pp1. I have done spindles knuckles, etc. I now need to find some wheels with the correct offset/ to fit with no poke. Anybody got some specs to share?

I need the black trim piece/ pieces for the passenger side mirror. The piece on the bottom of mine fell off somewhere. I don't need the whole mirror assembly so options, color, broken or missing internals, do not matter. Lmk what you have. I have 2015 GT but I think my15 and up works. Thanks

I have a set of these covers for my 15 GT. I have had them off for a minute and missplaced the push clips for the larger(middle) mounting hole. Could someone that has these take a picture of that hardware and get a size or maybe a part #? These can't be purchased from AM or MMD. Thanks in...

Trying to load a my18 as built into forscan to use on my15. I am having a couple of issues after syn2/3 swap. Clock reads --:-- even though time is correct, and my heat cool seat buttons don't work on touchscreern. I cant seem to get the file to forscan. Can someone walk me through the steps to...

Hey all, I have done a sync3 version 3.4 on my MY15 GT with MFT. The car is a 400A package. Everything seems to be working great except the soft buttons for my h/c seats. The buttons are present. The hard buttons are working fine. I am familiar with Forscan and have updated everything I needed...

I am upgrading an MY15 gt pp1 to gt350 brakes all around. I have the Brembos on the front so wheel clearance is ok. However, I would like to run the pp1 wheel I currently have on the rear. I will eventually be upgrading the wheel/tire combo but I just put on new as+3's and would like to use them...

I have a 15 PP1 400A GT and it has a very strange electrical setup. I have this lug attached at the fuse panel underhood. It leads to this fuseholder with a 10A fuse. That goes underneath the fuse panel and is taped to a black wire that run down into a harness Anybody venture a guess? Judging by...

I have a used Roush hood scoop for sale. I bought this used and I do not have any history on it. It will fit 15/17 but I do not have the 10mm nuts to mount. All the mounting studs are intact but it will need paint and new 3m tape for mounting. This may have been replace as I have the Roush box...

I have an Ikon camo carbon .weave splitter that I bought from another member. He did not install it and I didn't either. I decided to go a different way. This fits at least 15 /17 but not sure of anything else.i have the pp1 and it looked very nice when held up to it. I prefer not to ship, local...