Search results

Just installed ours today!!! Loving them. :headbang: Thanks for getting them to us in time for this weekends race/show.:headbang: They also allow for the hood to be open a bit more then the stock prop holds it open which is a bonus!!! Install took about 15 minutes and yes I read the...

We are finalizing our tuning for the 2015 Mustang Ecoboost and are ready to release the custom tuned SCT Xcal4 for this vehicle. :headbang: Our tuning unleashes 30 more hp and 50 more ftlbs of torque on 93 Octane. http://www.mustang6g.com/forums/showthread.php/initial-wms-sct-4473.html We...

UPDATE... 304/342!!!! UPDATE!!! More better numbers!!!! :headbang: 304hp/342tq!!! Stock was 276/291 Thats a gain of 30hp over stock and 51ftlbs/tq :headbang::headbang: So excited to get these numbers and to get our custom tuning up and running on this awesome little 4 cylinder...

Yes 93 Octane. We also just made 324tq on a subsequent pull and so far no knock sensor activity at all so we have even more to squeeze out of this car. Also, FWIW boost, measured at the intake manifold is 21.6 at 5400 stock. :shocked::clap2: It starts off at 12, ramps up to 17 and then...

We were able to do some SCT custom baseline tunes for our 2015 Ecoboost Mustang today. Baseline pulls totally stock were 275hp/291tq Our second tune on the car this afternoon gave us 295hp/316tq. :headbang: **EDIT** Further tuning gave us 304hp and 342tq!!! for a 30hp and 50tq gain. Thats...

4th gear and 5000 rpms. JJ

The race mode was selected and will always be selected for all drag strip times. Our car has the Ecoboost performance package with 3:55 gears. I dont see a reason to test anything with less gear considering those who get a car with less gear are either not going to race or will wind up...

We have partnered with Air Raid to bring the Mustang Ecoboost owners a high quality CAI and tune package. :headbang: Air raid has a very high quality air intake kits that are completely injection molded with no unsightly seams or blemishes. They have high quality silicone adaptors and OEM...

Most likely we will. The prototype off road pipe should be in my hands and on the car this week for testing.:headbang: This is a stick car and dyno'd in 5th gear. There is a recirc valve so thats why you dont hear any blow off. We are working on a blow off kit to atmosphere. :headbang...

Great information especially the weight at the corners. Our Eco weighed 3580 w/o driver and we will corner scale it next week. The dyno numbers are high and the MD dyno is the easiest one to manipulate the numbers, do you know what the roller weight was set at for these sessions? JJ

[ame] Not one of our better runs but still not bad for totally stock and a 2.2 60ft spinning. :headbang::headbang: In the other lane was AM's GT running 13.19, we werent far behind it and we killed the Ecoboost Auto car they brought. :shocked: Our best ET that evening was 13.8@102 and...

We took our bone stock Ecoboost 6spd manual to the track last night for some baseline runs. Ran the car no less then 10 times. Had a best 60ft of a 1.91. All the other 60fts were in the 2.0-2.2 range. All of the protections the calibration has in it affect the car from run to run but it did...

[ame] :headbang::headbang: JJ

[ame] Completely stock on our dyno with 60 miles on the odometer.:headbang: Enjoy, JJ@WMS

We are working as quickly as we can to bring to market the first off road downpipe for the 2.3 Ecoboost Mustang. It will be a high quality direct bolt on Off road pipe. Our car is being used for fitment and for testing. We will post the results of both asap. :headbang: JJ@WMS

We will be rocking this car at the track as soon as possible. :headbang: Sure would be cool if the NMRA would create a class, if not I'd be interested in running Super Stang with it or maybe Modular again. JJ

Those are SAE Numbers on our dyno. Corrected for weather conditions etc... So any other SAE numbers should be a good comparison. Also, FWIW the measured airfuel at WOT Anything over 4k rpms was rich, very rich.. Lots to be uncorked with a tune and we will be doing just that JJ

[ame] Our R&D car hit the dyno, fresh from picking it up at the dealer this afternoon (60 miles on the odometer). Ours is an Ecoboost 6spd manual car with the peformance package. We will be offering tuning very soon and will have some tuned numbers coming up shortly. :headbang: Also this car...

Call 877-752-2706 with that rail car number. JJ

We are tracking our car. Its a 2015 Ecoboost 200A car with 6spd manual transmission. Black in color. How detailed of a track can you get? Well if you make enough phone calls and the dealership tells you the rail car number then you can get pretty much dead on tracking. At the moment I'm...