Search results

Well, I got some new 30A fuses for the fuel pumps. Not sure where the originals ended up, but at least the car starts. Still no power at the OBD2 port.

After checking for power at OBD2, I started checking all fuses. All of the mini blade-types have small contact points I can check for continuity without even pulling the fuse. Under the hood, all of those were good. I took out all the fuses under the hood and checked for continuity, and all...

Interesting... I drive mine as my daily driver. It doesn't get as much use as it used to before COVID, but it still gets driven 4-5 times per week, minimum, just doing errands. I looked up the OBDII pinouts and found this: I put the red probe of my multimeter in port 16, and the black in...

Just took my 2017 GT to get a state inspection at the local oil change place, and they couldn't do the inspection because they said there was no power at the OBDII port so they couldn't get anything to come up on the computer. I have mucked around under the driver's side dash and replaced the...

Thanks for this pic, as well. I took it off yesterday and noticed what's behind it. I considered putting it above the "louvers" as well. I took the circuit board out of its metal housing to cut down on the space required. Mine is an Alpine RUX-Knob. Not sure where the best option is, but...

Can anybody supply the part number for this panel? I want to put my bass knob here but would like to buy a replacement in case I want to go back to totally stock. From this page, it looks like it’s <046A76. I can’t find it online anywhere, though...

How’d you get a ring terminal under the seat bracket? Does a 1/0 ring terminal stretch that far? My 4ga had to be reamed out to fit around the seat bolt, but I can’t sandwich it between the black painted hinge plate and the body. The holes physically won’t like up.

I know this thread is pretty old, but I'm looking for ground points for stereo stuff. Where did the other end of the ground cable go from here? Did you run it back to the battery? Find a ground point in the parcel shelf area? Ground to where you welded to the frame?

Can anybody supply a pic of where this ground location is for OP’s amp? Seems almost everyone uses the bolt in the spare tire well, but I’m looking for one closer to the rear deck/parcel shelf/rear seats.

I just wrapped the threads on this pressure sensor on my '17 GT with high temp teflon tape. Now, I'm getting a low oil pressure warning, even though my PP dash gauge reads normal. Any way to fix this?

Typically, subs are crossed over at 80 Hz, as a starting point.

I watched this video: They mention it, but don't really go into detail as to what's happening. They just say they're leaving it alone because they're going to use a plug-in subwoofer level control. @Cathul Do you have any tips? Thanks!

I got a DSR1 for Christmas and I'm working on flashing it using the Weblink Desktop app. There's a page in the software where you're configuring your flash that has absolutely no description as to what it's doing. The top of the screen says "OEM RADIO CONTROLS." There's an "assignments"...

You have RCA's coming from Hextall's harness, right? Those RCA connections go into the DSP inputs. The Dayton is a 4x8 with 4 channels of input, 8 channels of output. So your inputs would be all 4 RCA's that come out of Hextall's harness. Then RCA cables go from the DSP output channels to...

Check this thread. https://www.mustang6g.com/forums/threads/my-custom-audio-build.29714/ You even commented in that thread. :wink: He put 10" subs under the rear shelf in an IB config using some spacers. I have a couple of 8" subs I used in this manner in an old Maxima. I've contemplated...

I was driving home from getting some lunch and saw 5-10 S550's all lined up about to turn west on Brown Street in Wylie from Hwy 78. It's Bluegrass on Ballard today and I think there is a car show, but just wondered if any of those folks were on here. Nice looking cars! Made me want to follow...

Yes, he's a member here. https://www.mustang6g.com/forums/members/hextalls550.28081/ Here is his website. https://www.harnessbyhextall.com/ There is also a Facebook Group called Harness by Hextall.

My first reaction is that those are all 4 ohm impedance speakers, and not all of the factory speakers in the 9-speaker system w/ amplifier are 4 ohms. This can affect volume levels since the factory amp is designed to operate with different impedance. It can also affect the amplifier function...