Search results

Couldn't see spending the money on an oil separator I could make in a few hours on a mill and a lathe. So, I designed and built my own. There's an o-ring seal in the cup and an extension tube to keep the gasses from short circuiting the separator. The extension tube sits a couple of mm...

I got tired of waiting on an aftermarket pillar pod. So, last week I began mocking up my own. I used a 2" PVC street elbow and cut the larger end off using a bandsaw. I then cut that end to fit the contour of the factory A pillar, but at an angle I could read the face of a gauge. Once the elbow...

Does anyone have the header flange dimensions for the Coyote? I know tube spacing is 100mm, but I cannot find dimensions for the bolt holes. If anyone has them or could measure them for me that would be great. I need the hole diameter and either an angle and hole center spacings, or x,y...

Last weekend I installed a Magnaflow competition cat-back system. In a couple of weeks I'm going to order either ARH or SW headers and get a Lund tune from Beefcake. I'm not a fan of CAI's, and they only seem to be worth 5-10hp on these cars anyway. That being said, is it possible to get...

Hopefully these aren't stupid questions or ones that have been asked several times, but... 1) What exactly do tuners give you in a tune? Do they tune the engine only, or do they tune transmission features as well? I believe I've read that some tuners change shift points. I guess it would be...

I was coming home from work the other night, 3am, and was driving like a lunatic. It's about 10 miles of winding, hilly road mixed with long straights, so there's a lot of fun to have when no one is around. When I slowed down to pull into the drive, I could hear the tires sucking on the pavement...

This may be a stupid question, but how many volts are you guys getting in your mustangs? I only ask because mine reads 12.3-12.6 in the Information Display and this seems kind of low to me. I'm used to seeing 13.3-14.5 on newer cars. I've not actually measured the battery itself while the engine...

I'm not usually a fan of adding much "bling" to a car, but I wondered what a color matched set of Roush window scoops would look like on my Magnetic GT. Any opinions? Flat black?

They sent a nice brochure and some decals, including an American flag...

This forum has separate sections for 2.3, 3.7 and 5.0L engines. Why not have separate sections for auto and manual transmissions?

I painted my engine/coil covers this weekend. I bought a can of Magnetic Metallic base coat to match the car. I also scanned the coil covers into my computer and cut silver vinyl for the lettering and stripes. I used stainless socket head screws to attach the insert to the engine cover...

1: How do you remove the satellite radio antenna to wrap the roof in vinyl? Does it come off from the outside or under the headliner? 2: Can someone tell me if the plastic rivets that hold the insert into the plenum cover come out or if they're part of the insert? I plan on leaving the insert...