Search results

Thank you for sharing!! Some awesome information in there!! I’ve done a lot of reading on PWTA liners and from what I understand, from the factory the cylinders are PWTA coated and sprayed and they are then honed in order to introduce a cross hatch meaning in theory, you should be able to...

my main concern is really that there seems to be a little oxidation in the bore. Not really sure what it is or whether or not it will effect ring seal or not. I know in the motorcycle world, people have cleaned up there Nikisil plates cylinders for years with a fine scotch bright pad and WD40, I...

so my block has a really nice cross hatch in it. As long as there is a decent cross hatch in it in theory I should be ok?

Hello, I had a question for all those that have used a Gen 3 or Voodoo block for a build. I was wondering what people have done to hone/clean up the PWTA Cylinders if anything? I have just acquired a Voodoo block and the cylinders are in good condition but I was wondering what others have done...

Hello, I was hoping those of you familiar with the Voodoo heads might be able to shed some light on this for me. I recently acquired a Flat Plane Voodoo Shortblock and I was trying to figure out which heads to top them with. I already have a set of Ported Boss heads and I was wondering if I...