Search results

Roughly 1000 miles. Did the install myself so I can verify they did not get switched. I thought it was the passenger side that took the extension? It’s been a while since I did it so I could be mistaken.

I’m sure the headers messed with the transport delay for the o2 sensors. This issue occurred suddenly out of no where. I’ll check a/f when testing next time. TB is clean (aside from gunk on the face that would require sanding to remove.) MAF visually looks fine. I’ll grab some cleaner just to...

happens every hot start for me. It just kind of popped up out of no where. Maybe purge valve or evap causing the issue. I can fill my tank without it stopping me so I assumed it was venting properly.

No tune No codes air filter is new, maf is clean, throttle body I mentioned in the above post. Maybe that’s contributing to it? Vac lines on the imrc’s look fine. Vac lines on the front of the manifold could be better. Not acting like a vac leak but I’ll change those for safe measure. I’ll...

the throttle body blade does have something that looks like it melted onto the face of it. Won’t come off without actually sanding it down. It’s on the face of the blade so not sure if it would effect anything.

2019 Bullitt, long tubes and x pipe are the only mods. I’ve attached a video for reference. On throttle tip in, the car bogs and tries to stall. After initial tip in, it responds perfectly fine. If I hot start the car and try to drive immediately. It’ll buck and sputter for a few seconds during...

Since everyone always asks why. Car is being traded in is the reason for selling. Not sure if it makes a difference but it was on a gen 3 car. Satin G2 head unit with straight cut gears Satin G3 intercooler Tial 50mm BOV 125mm pulley LU47 injectors Vortech BAP also including Lund RTD tuner...

2019 GT MT-82. Between 20mph up to 35mph. There’s a noise coming from the shifter area. It sounds like a sticker stuck on the driveshaft. (It’s not, unfortunately). In gear or in neutral doesn’t affect it. Just at those speeds. Second owner. The car has done this since I’ve owned it. Ideas?

Thanks for the heads up. Just finished installing my kit and trying to decide between vented or closed catch can. What issue did you have?

What catch can setup do you have?

weld wastegate on the cold side of the intercooler. Basically mimic how the bov is mounted. Drill and tap a barb fitting next to it for pressure reference.

thanks!

Maybe Brevin will chime in. While waiting for my kit to arrive. Does anyone know the max impeller speed for the G2 head unit? Looking to do a waste gated setup.

UPR adjustable motor mounts for 15-19 gt. brand new in box. SOLD

few things to part out. everything has less than 4000 miles on them. parts are for 18-19. UPR driver side and passenger side catch cans. $250 obo PMAS no tune intake $250 obo SCT BDX unmarried. still has plastic on screen. comes with all cables. $250 obo SVE R350 bronze wheels 19X10/11 with...

Collin @ RI Automotive/Racing Integration does great work. highly recommended.

Hey TJ. Looking at buying some steeda axle backs. any discount code for those?

i'm surprised. i'm getting ready to pull the trigger on a setup. curious to see how much larger the stage 2 is compared to that.

That's not the stage 2 intercooler on the car now?

BAP needed for 93 pump gas?