Sponsored

Search results

  1. Shelby GT350 Throttle Bodies and DLX Controller

    no black Friday sale?

  2. Does anybody know the part number of the 4 torque to yield bolts for the 2018+ 5.0 HPFP cam cap?

    This is the part number for the cam journal bearing caps that and you need 10 per cam or is this a bolt for something else? TIA

  3. GEN 4 5.0L COYOTE DARK HORSE LONG BLOCK

    Do you know if the cam bearing caps are the same and bolts? I may need to do some valve work and want to make sure I get the correct tools. Thank you

  4. GEN 4 5.0L COYOTE DARK HORSE LONG BLOCK

    Are the heads on a gen3 mustang the same as a gen4 mustang? TIA

  5. Bad Valve Seal #6

    OP, there is no way that's this wouldn't be covered under the power train warranty. I am shocked that you let them say it's not covered unless your mods voided the warranty.

  6. [?] '18 Intake Manifold on '15-'17

    What ever is easier for you, I bought a vacuum connector set like this one since the hoses are two different sizes there. https://www.autozone.com/fittings-and-hose-line-connectors/vacuum-connector-and-tubing/dorman-autograde-assorted-straight-hard-vacuum-tubing-connector-8-piece/426012_0_0

  7. [?] '18 Intake Manifold on '15-'17

    You only need one vacuum line so I plugged the other side of the Y connector, since then I purchased the correct vacuum coupler at pep boys and removed the Y connector.

  8. [?] '18 Intake Manifold on '15-'17

    https://www.mustang6g.com/forums/threads/18-intake-manifold-on-15-17.95295/page-139#post-2484746

  9. [?] '18 Intake Manifold on '15-'17

    Hello gents, I'm getting my 2018 IM ported, so I'll be getting an updated tune, shift points are set pretty low. Wondering what should I ask my tuner to set then to? WOT shift points at 7400 and the rev limiter set to 7900? Stock as OPG's and NA TIA!
  10.

    Arizona Part out SOLD

    In AZ? If so let can you PM me his info? Looking to get mine ported. Thx

  11. [?] '18 Intake Manifold on '15-'17

    Did not dyno but it pulls a lot harder above 4k. Even the wife noticed it when we went on a road trip and had to pass some people up!

  12. [?] '18 Intake Manifold on '15-'17

    I got mine from ebay, new take off. It is not ported.

  13. [?] '18 Intake Manifold on '15-'17

    Here is the part list I recommend if you are using pigtails. 1. Plug and play harness 2. 2 ft of 3/8" vacuum (fuel) hose, or what ever the local auto parts have in stock. 3. 3/8" 90 degree radiator hose for the evap valve. Dayco part number 71210 or you could use 87002 and cut to size if...

  14. Team Beefcake Racing Tax Refund Sale!!

    Beefcake? Bunch of Ex Chip N Dale Dancers???

  15. Shout out to Torrie at Unleashed Tuning

    Agree! Torrie is the best!!!

  16. [?] '18 Intake Manifold on '15-'17

    Okay Thanks guys!

  17. [?] '18 Intake Manifold on '15-'17

    Yeah disconnecting the harness from the stock manifold was the hardest part on this install for me. I had very little slack so I could not get to the connectors to unlock them. I had to blindly cut some stupid zip tie on the stock manifold and then I was able to get to the connectors This part...

  18. [?] '18 Intake Manifold on '15-'17

    Okay thanks! I will ask my tuner about it! Not sure if I don't remember this happening but around 4K, My car starts to pull like crazy! It is like I down shifted but I did not! I can feel the G's put me back in my seat! lol! I hope it is in the new intake!!!

  19. [?] '18 Intake Manifold on '15-'17

    Oh I meant everything else is stock too, I think I may have OPG confused with something else. I would rather have safe than a couple more 100 RPM's since I do not race and this is my DD.

  20. [?] '18 Intake Manifold on '15-'17

    He said rev limiter is set to 7400 and shifts at 7250. Is that good for an auto with stock injectors, OPG and 91 octane tune?





Top